boostedmk6
Go Kart Champion
Mike the car looks great with the smoked markers.
For some reason I thought you got VMR wheels though.
For some reason I thought you got VMR wheels though.
I really like the wheels from the 2012 Autobahn edition. Where'd you get them?
Mike the car looks great with the smoked markers.
For some reason I thought you got VMR wheels though.
Yup! You gave me the idea - it looks even better on your CSG.
I was going to get VMR wheels, but they're backordered til July. I really don't wanna wait that long (and riding on winter tires)... So these will do for now!
BTW, thanks for all the detailing tips and advice on supplies - my car looked great after washing it before taking those pictures. I really like the Poorboy's Trim Restorer you told me to get. As well as the Poorboy's Bold N Bright Tire Dressing. Do you have any tips on reducing the amount of water spots after washing? Had no shade to work in
Hey mike glad you like the wheels, those shots really make me regret selling them!!!! Bah now I have to hunt for wheels! Lol... Weigh them for us ppleaseeeeeee!
Hey I wouldn't complain they look sweet and the black inserts really compliment the car.
Well there's a few things you can do to reduce water spots. First try to wash your car early in the morning or late at night if you can. But if you're in the sun wash one or two panels at a time and rinse so the soap doesn't dry. Once your done you can follow with a quick detailer if water spots still remain.
P.S those wheels are clear coated and can be polished out if the scratches bother you.
Bluetooth Module Styrofoam to Plastic/Metal Bracket Installation
Required Parts
These are the parts required for this DIY:
3CO-919-935-A = metal bracket (1 required)
1KO-971-813-C-9B9 = plastic cover (1 required)
These are required to mount the module to the metal bracket:
N-909-446-03 = bolt (3 required)
N-100-173-04 = nut (3 required)
These are required to mount the metal bracket to the floor:
N-908-170-03 = screw (2 required)
N-909-460-01 = plastic clip (2 required)
Thank you Brendan from Bramgate VW for the parts!
Ugly-ass Styrofoam. Ghetto!
Take that sucka off the floor.
Take the module out of the Styrofoam.
Unhook the cable from the module and attach the module to the metal bracket using the nuts and screws. I install the nuts and screws backwards since that way, it would sit on the floor better. I don't think this will make a difference later on.
See these holes on the floor?
Take these plastic suckas
and insert them into the hole.
Take the screw and screw it into the side.
Put the cover over the bracket. It should hook on from the bottom so it doesn't jiggle around.
Caution: Disconnecting the bluetooth module will give you fault codes in 19: CAN Gateway.
Just clear it the fault codes using VCDS and all is good!
nice wheels, can't wait for my springs too!
I think they look perfect! I'm jelly now...
What is the ballpark cost on this? I hate that foam.
Thanks!
Thanks!
I actually don't remember... Maybe 40-50 bucks? It's kinda high, but its a nice little mod.