VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com

VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com (http://www.golfmk6.com/forums/index.php)
-   VW Golf R Forum (http://www.golfmk6.com/forums/forumdisplay.php?f=7)
-   -   Pacs Golf 6 R build Stage unknown (some pic added ) (http://www.golfmk6.com/forums/showthread.php?t=98449)

Pacs 12-26-2015 06:13 AM

Pacs Golf 6 R build Stage unknown (some pic added )
 
Hi

All new here

Ride is a 2010 Golf 6 R stage ???

When i got this car it was semi modded allready so iam not sure what parts are fitted

Prewus owner have add

BCS turboback
THS intercooler.
Auto Tech high pressure fuel pump
ko4 Hybrid Turbo with larger turbine / lightweight wheels .
Heat coated surfaces. Ported manifold about 4%. Reinforced bearings,
which makes it suited for 10-15 % more pressure

It was supose to do 380-390hp but it had some air intake
problems and some injector problems as well so outcome was 340 HP

i meet up with a local tuner and we added some stuff :-D

Revo air intake
Rs4 injectors
R8 ignition coil
new sparkplugs
new oil

oooh and we changde the turbo to a TTE420 :D:D

Car is now pushes 460HP and 597nm
We also did do another set up at 457 HP and 611nm

Custum DGS file too

We did test on normal road with streettyres and racelog

0-100 km/h 3,4 sec

80-150 km/h 4,8 sec

Atm we are working on WMI and hope it can provide approximately 60 hp

And we add a boost controller as well

Iam thinking on mabye getting a HPA intake manifold
but iam not sure what we can do with that

I saw that on APR stage 3 they add 35-50hp so i am not sure if we do that
and hope for 550 HP ?

We may have max out the TTE420 around the 500 HP mark

More info to come when we done with the WMI :-)

I upload some pics and if possible, a video of the dyno test

Pacs 12-26-2015 06:15 AM

9 Attachment(s)
Iam going for the sleeper look if you can say that with the R

Removing all bagdes on the car and if possible the ones on the breaks as well

The engine need too be as OEM as possible and i will change cooler and washer caps to blacks

I hope we can change the Revo intake with a R36 and ad a TTRS engine cover

I really want to get the WMI tank replaced and the water/meth stored in a washer tank on the other side of the bumper

We are not sure if that is possible but I think we give it a go :D














Revo Air Intake

http://www.golfmk6.com/forums/attach...6&d=1451143168


Car on dyno

http://www.golfmk6.com/forums/attach...1&d=1451143467


Old injectors


http://www.golfmk6.com/forums/attach...1&d=1451143467


RS4 mounted

http://www.golfmk6.com/forums/attach...1&d=1451143467

Carbon all over but it got cleaned

http://www.golfmk6.com/forums/attach...1&d=1451143467


New TTE420 :D:D:D

http://www.golfmk6.com/forums/attach...1&d=1451143467

http://www.golfmk6.com/forums/attach...1&d=1451143467

Car back on dyno all linked up

http://www.golfmk6.com/forums/attach...3&d=1451143465

Outcome of some hard work :D:D:D:D

http://www.golfmk6.com/forums/attach...1&d=1451143996

zrickety 12-26-2015 09:38 AM

Sounds good, where are the pics?

Pacs 12-26-2015 10:54 AM

Quote:

Originally Posted by zrickety (Post 2355292)
Sounds good, where are the pics?

On the way just trying to find out how :)

Pacs 12-27-2015 12:30 PM

7 Attachment(s)
some more pic form the build

http://www.golfmk6.com/forums/attach...5&d=1451233743

http://www.golfmk6.com/forums/attach...6&d=1451233743

http://www.golfmk6.com/forums/attach...7&d=1451233743

http://www.golfmk6.com/forums/attach...8&d=1451233743

hooligan74 01-05-2016 05:41 PM

Nice results!

Pacs 01-11-2016 07:34 PM

5 Attachment(s)
Tnx

More pictures on the way but sadly the engine broke a valve

kern417 01-11-2016 09:16 PM

how

Pacs 01-13-2016 07:11 PM

Quote:

Originally Posted by kern417 (Post 2361879)
how

Valve spring broke then the valve got a slap from the piston

kern417 01-14-2016 08:52 AM

ouch. any ideas what cause the valve spring to break

Pacs 07-07-2016 04:56 PM

Quote:

Originally Posted by kern417 (Post 2363302)
ouch. any ideas what cause the valve spring to break

Week spring I guess ?

Well we are back on track

Car is running now at 475 HP and 601 NM I think

We did this


1 New piston old model ( we found one in Germany )
All new valves
All new valve springs
New timing belt and water pump
New Cam follower
Gearbox flushed and new oil
New RS4 injectors
WMI is mounded but not all maxed out


Sadly we forgot too get the top ported for a better flow :mad::mad:

Well and we forgot to change the cam chain and tightener but that's fixed now

Breaks are also fixed and now it is time for a new DSG clutch and flywheel

I am looking for some upgrades and SSP clutch look fine but I don't know about flywheel

Any 1 got info on upgrade flywheels let me know

Pacs 02-22-2017 08:08 PM

2 Attachment(s)
Just some race times :happyanim:

http://www.golfmk6.com/forums/attach...0&d=1487808231

http://www.golfmk6.com/forums/attach...1&d=1487808443

bebersol 02-23-2017 04:36 PM

Quote:

Originally Posted by Pacs (Post 2355277)
Hi

All new here

Ride is a 2010 Golf 6 R stage ???

When i got this car it was semi modded allready so iam not sure what parts are fitted

Prewus owner have add

BCS turboback
THS intercooler.
Auto Tech high pressure fuel pump
ko4 Hybrid Turbo with larger turbine / lightweight wheels .
Heat coated surfaces. Ported manifold about 4%. Reinforced bearings,
which makes it suited for 10-15 % more pressure

It was supose to do 380-390hp but it had some air intake
problems and some injector problems as well so outcome was 340 HP

i meet up with a local tuner and we added some stuff :-D

Revo air intake
Rs4 injectors
R8 ignition coil
new sparkplugs
new oil

oooh and we changde the turbo to a TTE420 :D:D

Car is now pushes 460HP and 597nm
We also did do another set up at 457 HP and 611nm

Custum DGS file too

We did test on normal road with streettyres and racelog

0-100 km/h 3,4 sec

80-150 km/h 4,8 sec

Atm we are working on WMI and hope it can provide approximately 60 hp

And we add a boost controller as well

Iam thinking on mabye getting a HPA intake manifold
but iam not sure what we can do with that

I saw that on APR stage 3 they add 35-50hp so i am not sure if we do that
and hope for 550 HP ?

We may have max out the TTE420 around the 500 HP mark

More info to come when we done with the WMI :-)

I upload some pics and if possible, a video of the dyno test


457 HP and 611nm NICE!

bebersol 02-23-2017 04:41 PM

is that a stock location for the battery?


All times are GMT -4. The time now is 02:06 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.