View Single Post
Old 02-11-2012, 08:33 PM   #24
Formula 5000 Champion
zVp's Avatar
Drives: 2012 Black GTI (DSG)
Join Date: Jun 2011
Location: GTA, Canada
Posts: 2,853
Horn Confirmation when Locking MFA Menu
Thanks to veedoubleme at

WARNING: I will not be held liable if anything occurs when attempting to change anything in the VCDS software. These instructions are created to the best of my knowledge and are as accurate as I can make them. Please be careful before you save your settings and always run Auto-Scan before any changes are attempted.

Load up VCDS, click on the Select button under Select Control Module

Click on the 09-Cent. Elect. button

Click on the Coding - 07 button

Click on the Long Code Helper button

Go to Byte 5 and uncheck Bit 2 - Horn Confirmation Adaptation Blocked (Adaptation Channel 010/011 & MFA+/FIS)

You can now turn on/off your horn confirmation when locking on the fly with the menu in the MFA. It should be under the Convenience sub-menu.
Checkmarked means your horn will beep when locking the doors; unmarked means your horn will not beep when locking the doors.
DSG | APR Stage 1 | DriverGear Springs
zVp's Car Journal

Last edited by zVp; 09-08-2012 at 09:45 PM.
zVp is offline   Reply With Quote