View Single Post
Old 02-11-2012, 08:52 PM   #27
Formula 5000 Champion
zVp's Avatar
Drives: 2012 Black GTI (DSG)
Join Date: Jun 2011
Location: GTA, Canada
Posts: 2,853
Comfort Turning Signal

WARNING: I will not be held liable if anything occurs when attempting to change anything in the VCDS software. These instructions are created to the best of my knowledge and are as accurate as I can make them. Please be careful before you save your settings and always run Auto-Scan before any changes are attempted.

Load up VCDS, click on the Select button under Select Control Module

Click on the 09-Cent. Elect. button

Click on the Adaptation - 10 button

On the drop-down menu, select Comfort Turn Signals (Cycles)

Change to your preferred number of cycles/blinks (3 is default) using the Up and Dn buttons

Save your changes.

Depending on the model and/or year of your car, this will not work right away.
Go to your MFA menus, enter the LIGHTS/VISION menu and restore settings to factory. Attempt to use the comfort turn signal.
DSG | APR Stage 1 | DriverGear Springs
zVp's Car Journal

Last edited by zVp; 09-08-2012 at 10:00 PM.
zVp is offline   Reply With Quote