View Single Post
Old 02-20-2012, 01:03 PM   #38
zVp
Formula 5000 Champion
 
zVp's Avatar
 
Drives: 2012 Black GTI (DSG)
Join Date: Jun 2011
Location: GTA, Canada
Posts: 2,853
Coming/Leaving Home Menu in MFA

How-To
WARNING: I will not be held liable if anything occurs when attempting to change anything in the VCDS software. These instructions are created to the best of my knowledge and are as accurate as I can make them. Please be careful before you save your settings and always run Auto-Scan before any changes are attempted.


Load up VCDS, click on the Select button under Select Control Module


Click on the 09-Cent. Elect. button


Click on the Coding - 07 button


Click on the Long Code Helper button


Go to Byte 12 and check Bit 2 - Coming-Home Mode (0 = Automatic / 1 = Manual)


Go to Byte 17 and check Bit 5 - Coming-Home (CH) Active and Bit 6 - Leaving-Home (CH) Active

You will have the Coming Home and Leaving Home menu in your MFA. If you go deeper into the menus, you can set the interval in +/- 10 sec to your preference.





__________________
2012 DEEP BLACK PEARL GTI
DSG | APR Stage 1 | DriverGear Springs
zVp's Car Journal

Last edited by zVp; 09-08-2012 at 09:50 PM.
zVp is offline   Reply With Quote