Darryl@HPA
Ready to race!
HPA Motorsports, the original distributor of ST and KW Suspensions within North America, is pleased to offer the full selection of ST Suspension products, including coilover kits, anti-sway bars, and lowering springs.
ST XT-A Coilovers
Performance Driving in Mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced body roll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable top mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy Lowering Adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower.
KW Engineering: Exclusive for ST Suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.
Features
Click here for more information on ST XTA Coilovers…
ST X Coilovers
Need to get low?
ST coilovers feature a continuous thread construction for height adjustment from moderate to extreme. Each coilover is manufactured by KW Automotive, ensuring maximum quality and fantastic driving dynamics.
Once installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35mm and 65mm of lowering on both the front and rear axles.
Improved Driving Dynamics and Handling
Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s body roll during compression as well as improving agility when driving fast. As with the XTA coilover, each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Lowering with Style: the ST X coilovers
Click here for more information on ST X Coilovers…
ST Lowering Springs
ST Suspensions is proud to boast one of the largest applications for sport springs with more than 1000 vehicles now catered for. What’s more, ST sport springs are one of the few lowering springs on the market that (in combination with the standard suspension) will greatly improve the driving behaviors of a vehicle as well as its overall looks.
Performance and style for every car
Made from chrome silicon steel in a cold winding process, ST sport springs are multi-coated with a final epoxy coating ensuring an OEM quality and finish. As a result, they withstand a variety of weather conditions all year round. Depending on the vehicle model, ST suspension sport springs will allow a typical lowering of around 20mm on the front axle and 15mm on the rear axle.
Compared to standard suspension, ST sport springs lower the centre of gravity to provide much better driving dynamic and handling. Furthermore, compression and rebound is also reduced which allows the car to drive more agile with reduced body roll.
The ideal spring rate for every car
The spring rates of ST sport springs have been designed to work perfectly with the standard dampers to ensure the driving dynamics are improved and ultimately safe. Vehicle weight, wheel loads and the level of lowering have a huge impact on the rebound and compression of a vehicle so it’s essential this is not compromised. Depending on the level of lowering (for example 20mm, 30mm or 40mm), ST sport springs have different spring rates that harmonize with the standard shock absorbers. Put simply the more lowering, the higher the spring rate.
Click here for more information on ST Lowering Springs…
ST Anti-Sway Bars
ST anti-sway bars work by connecting the opposite wheels of a car using a steel torsion spring to increase stiffness and reduce body roll. All ST anti-sway bars are manufactured from high quality spring steel and finished with a final powder coating.
Fantastic handling
Once fitted, ST anti-sway bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behaviour is much more direct allowing a sportier and more agile driving style.
Best performance for minimal cost
ST suspension anti-sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles. Benefits of fitting the ST anti-sway bar kit include:
Click here for more information on ST Anti-Sway Bars…
With almost 25 years of tuning the VW/Audi platform and over a decade of working together with KW, our team will be able to define the ST solution that will meet your needs and ensure you are getting the very best price possible.
PRICE Guarantee! If you find it cheaper, let us know. Once again, we are the Original Authorized Distributor of KW in North America and we will do our best to match or beat any competitors’ price.
Any questions regarding availability, freight costs, or delivery times on these products or any other KW products can be directed to HPA by IM or e-mail directly.
To order any ST Suspension products contact HPA Motorsports at 604.888.7274 to place your order. Visa and MasterCard are accepted, and PayPal can be set up upon request.
ST XT-A Coilovers
Performance Driving in Mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced body roll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable top mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy Lowering Adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower.
KW Engineering: Exclusive for ST Suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in all weather conditions.
Features
- Latest damping technology for maximum longevity
- Reduced system friction for effective damping adjustment
- Individual lowering within the TÜV-tested adjustment range
- Front and rear axle (when possible) with thread adjustment
- Galvanized coilover struts with additional coating for an optimized corrosion protection
- Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
- Aluminum adjustable uni-ball top mounts (when possible)
- Scaled camber adjustment (optionally also caster)
- Externally adjustable damping
Click here for more information on ST XTA Coilovers…
ST X Coilovers
Need to get low?
ST coilovers feature a continuous thread construction for height adjustment from moderate to extreme. Each coilover is manufactured by KW Automotive, ensuring maximum quality and fantastic driving dynamics.
Once installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35mm and 65mm of lowering on both the front and rear axles.
Improved Driving Dynamics and Handling
Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s body roll during compression as well as improving agility when driving fast. As with the XTA coilover, each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Lowering with Style: the ST X coilovers
- Individual lowering within the TÜV-tested adjustment range
- Front and rear axle thread adjustment (when possible)
- Galvanized coilover struts with additional coating for optimized corrosion protection
- Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
- Powerful twin-tube dampers with high-quality components for maximum longevity
Click here for more information on ST X Coilovers…
ST Lowering Springs
ST Suspensions is proud to boast one of the largest applications for sport springs with more than 1000 vehicles now catered for. What’s more, ST sport springs are one of the few lowering springs on the market that (in combination with the standard suspension) will greatly improve the driving behaviors of a vehicle as well as its overall looks.
Performance and style for every car
Made from chrome silicon steel in a cold winding process, ST sport springs are multi-coated with a final epoxy coating ensuring an OEM quality and finish. As a result, they withstand a variety of weather conditions all year round. Depending on the vehicle model, ST suspension sport springs will allow a typical lowering of around 20mm on the front axle and 15mm on the rear axle.
Compared to standard suspension, ST sport springs lower the centre of gravity to provide much better driving dynamic and handling. Furthermore, compression and rebound is also reduced which allows the car to drive more agile with reduced body roll.
The ideal spring rate for every car
The spring rates of ST sport springs have been designed to work perfectly with the standard dampers to ensure the driving dynamics are improved and ultimately safe. Vehicle weight, wheel loads and the level of lowering have a huge impact on the rebound and compression of a vehicle so it’s essential this is not compromised. Depending on the level of lowering (for example 20mm, 30mm or 40mm), ST sport springs have different spring rates that harmonize with the standard shock absorbers. Put simply the more lowering, the higher the spring rate.
Click here for more information on ST Lowering Springs…
ST Anti-Sway Bars
ST anti-sway bars work by connecting the opposite wheels of a car using a steel torsion spring to increase stiffness and reduce body roll. All ST anti-sway bars are manufactured from high quality spring steel and finished with a final powder coating.
Fantastic handling
Once fitted, ST anti-sway bars greatly improve road handling during rapid load changes and hard cornering by reducing the load difference between the inside and outside wheels. The steering behaviour is much more direct allowing a sportier and more agile driving style.
Best performance for minimal cost
ST suspension anti-sway bars have been developed through years of experience in the U.S market and now are available for a wide range of vehicles. Benefits of fitting the ST anti-sway bar kit include:
- Spring comfort remains
- Load differences between the curve-outside and inside wheels are minimized
- Improved handling
- Increased traction
- Multiple adjustments (when possible)
- Improved balance (under- or oversteer)
- Bearing made from high quality composite materials
- Made of high quality spring steel
Click here for more information on ST Anti-Sway Bars…
With almost 25 years of tuning the VW/Audi platform and over a decade of working together with KW, our team will be able to define the ST solution that will meet your needs and ensure you are getting the very best price possible.
PRICE Guarantee! If you find it cheaper, let us know. Once again, we are the Original Authorized Distributor of KW in North America and we will do our best to match or beat any competitors’ price.
Any questions regarding availability, freight costs, or delivery times on these products or any other KW products can be directed to HPA by IM or e-mail directly.
To order any ST Suspension products contact HPA Motorsports at 604.888.7274 to place your order. Visa and MasterCard are accepted, and PayPal can be set up upon request.
