6
F/S: TTRS/18Z/17Z, ETC caliper set feeler thread.....
- Thread starter BringerOdeath
- Start date
joshterrell861
Passed Driver's Ed
Whats that have to do with what hes selling. And yes creationmotorsports in the uk sells cheaper brackets. I just ordered 3 sets. 2 for boxster and 1 for 911 caliper swap
Sent from my SM-N920P using Tapatalk
BringerOdeath
Ready to race!
The 17Z uses a 330mm rotor and the 18Z uses 350mm rotor.
I can definitely get you 17z calipers if you would like them.
That I cannot, you either have to get the apikol, creation motorsports, or VAGBREMTECH brackets.
-SnowmanMafia-
Passed Driver's Ed
Do you still have the RS calipers for 360?
Also, I know they take the 370mm rotors. Are those direct bolt on without hub adapters or anything?
Everyone seems to go OEM and spend 200/rotor but these Stop Techs would work, no?
CENTRIC 12633121SR StopTech Sport Slotted
CENTRIC 12633121SL StopTech Sport Slotted
They're listed on multiple sites to fit the RS front rotors and are labeled as 370mm
https://centricparts.centriccatalog...EB_DISC&v=LD&y=2013&m=73&mm=992&uid=ANR&sid=0
Edit: Nevermind... those are the rear rotors after finding a diagram showing the size.
Also, I know they take the 370mm rotors. Are those direct bolt on without hub adapters or anything?
Everyone seems to go OEM and spend 200/rotor but these Stop Techs would work, no?
CENTRIC 12633121SR StopTech Sport Slotted
CENTRIC 12633121SL StopTech Sport Slotted
They're listed on multiple sites to fit the RS front rotors and are labeled as 370mm
https://centricparts.centriccatalog...EB_DISC&v=LD&y=2013&m=73&mm=992&uid=ANR&sid=0
Edit: Nevermind... those are the rear rotors after finding a diagram showing the size.
Last edited:
BringerOdeath
Ready to race!
Sorry for the late delay, but yes, I should be able to get you a set for $360.
Yeah, I don't think even stoptech makes an aftermarket 370mm front rotor. I think someone makes a 2 piece, but I just went for the OEM K revision rotors on mine. I think EEuroparts has the sheapest price and they have coupons that bring each rotor under $200.
BringerOdeath
Ready to race!
All the ttrs parts are direct bolt on. No hub adapter as both cars have the same size hub.
BringerOdeath
Ready to race!
You need either the stock TTRS 370mm rotors or you can use these caliper carriers to use the stock golf R 340 or 345mm rotors:
https://www.vagbremtechnic.com/fron...mbo-calipers-to-oe-340-or-345mm-discs-ak0003/
This kit comes with the braided steel lines you would need as well. That's all you need! It's prettty much a direct bolt on with the oem rotors from audi or the caliper carriers from vagbremtech. The oem rotors are something like 220 a piece, so the new carriers would be the cheaper solution if you go with the stock R rotors.
You also need to buy brake pads of course!
Pandaphunk
New member
Still doing this?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
BringerOdeath
Ready to race!
What were you looking for?
Pandaphunk
New member
I am looking for a set of 17z, are these used rebuilt? Or just used?
Sent from my iPhone using Tapatalk