Sauce118
Ready to race!
CTS Lightened Crank Pulley for MK5/MK6 TSI engine.
http://www.ctsturbo.com/cart/products/CTS_MK5_MK6_TSI_Crank_Pulley_Kit-4676-653.html
This will increase throttle response significantly and help with rev hang. CTS claims it adds 5-7 HP, but I felt a big difference (especially on K04).
This post is for the pulley only.. You will need to buy a $19.99 belt from CTS and a $3 dollar stretch bolt (not recommended to re-use the stock one, but you can) from ECS tuning or somewhere else. I have the links for both of these, and will provide to the seller. As you can see from the CTS link, they are on sale for $160. I will sell the pulley by itself for $100 shipped anywhere in CONUS. For $123 you can have a $160 pulley system. You can see from the picture that the pulley is in near perfect condition. There are some minor scratches on the powder coat from impact gun and that's about it.
I really like the product, and I am a HUGE fan of CTS. I am only selling because I am in process of GT3073R build with fluidampr to mitigate vibrations with the high output. Please PM or Text (two five two 626 2246)
https://www.flickr.com/photos/133732115@N06/39122633361/in/dateposted/
https://www.flickr.com/photos/133732115@N06/39122637321/in/dateposted/
https://www.flickr.com/photos/133732115@N06/39122638291/in/dateposted/
http://www.ctsturbo.com/cart/products/CTS_MK5_MK6_TSI_Crank_Pulley_Kit-4676-653.html
This will increase throttle response significantly and help with rev hang. CTS claims it adds 5-7 HP, but I felt a big difference (especially on K04).
This post is for the pulley only.. You will need to buy a $19.99 belt from CTS and a $3 dollar stretch bolt (not recommended to re-use the stock one, but you can) from ECS tuning or somewhere else. I have the links for both of these, and will provide to the seller. As you can see from the CTS link, they are on sale for $160. I will sell the pulley by itself for $100 shipped anywhere in CONUS. For $123 you can have a $160 pulley system. You can see from the picture that the pulley is in near perfect condition. There are some minor scratches on the powder coat from impact gun and that's about it.
I really like the product, and I am a HUGE fan of CTS. I am only selling because I am in process of GT3073R build with fluidampr to mitigate vibrations with the high output. Please PM or Text (two five two 626 2246)
https://www.flickr.com/photos/133732115@N06/39122633361/in/dateposted/
https://www.flickr.com/photos/133732115@N06/39122637321/in/dateposted/
https://www.flickr.com/photos/133732115@N06/39122638291/in/dateposted/