*****2.0t build thread

Stock Info

2011 VW GTI 2.0T

Candy White

Sunroof Package

6MT

RCD-510

18" Detroits



Engine Mods

APR Stage 3+ (GT30)

APR Injectors

APR Modular Boost Tap

Aquamist HFS-4 V3.1 Direct Port Meth

ARP Head Studs

AWE Turbo Outlet Pipe

BFI Stage 2 Motor Mount

BFI Stage 1 Full Trans mount

BSH Throttle Body Pipe

Cobb MAF Block Off

Deka ETX16L/M6 to SAE Adapter/ Custom Mount

Eurodyne Tuned by myself

Fluidampr Crank Pulley

Godspeed Intercooler and Hoses

IE Forged Rods

K&N Large 6" Filter

Magnaflow 3" Catback

N2MB WOT Box

NGK BKR7EIX Plugs @.028

Powerflex Small dogbone bushing

R8 Coilpacks

Spectre 3" Velocity Stack

Synapse DV

TTRS LPFP Controller
Vibratechnik Subframe amount

6.6 Bar Fuel Filter



Transmission Mods

Diesel Geek Six Sigma Short Shifter

FFE Positive Engagement bushings

OEM Dual Mass Flywheel

OEM Metal Shifter Cable Bracket

OEM Steel Shift Forks (1-2, 5-6)

Peloquin LSD

Southbend upgraded pressure plate and stage 3 disk

USP Stainless Clutch Line



Suspension/Tires/Wheels

BF Goodrich G-Force SportComp2 225/40R18 Tires (summer)

Bilstein PSS (B14) Coilovers

BSH Rear End Links

Custom Under Body Brace

Custom 3" Frame Notch

H&R 24mm Rear Sway Bar

H&R 26mm Front Sway Bar

Motorsport Hardware Wheel Stud Kit

Neuspeed RSE07 Bronze 18x8 ET45

OEM Detroits on Michelin X-Ice (winter)

OEM TT Strut mounts and bearings

Spulen Adjustable Endlinks

Tyrolsport Deadset Kit

Unibrace XB

Whiteline WALK KCA-316

Whiteline W0503 Front Position FLCA Bushings

Whiteline trailing Arm Bushings W0504



Brakes

Stoptech Slotted Front Rotors

ECS Drilled/Slotted Rear Rotors (Will be converted to Stoptech's at some point)

Porsche 4 pot Brembo's (NQSBBK)

StopTech Street 309.11070 front pads

StopTech Street 309.14560 rear pads

USP Motorsports stainless steel braided brake lines



Interior

Aesthetic Creation Dummy Stickers

LED Door Puddle Lights

NewSouth RedLine Boost Gauge

NewSouth Vent Pod

OEM Euro Switch

OEM Dash Cubby

OEM CarGo Rear Liner

OEM CarGo Rear Liner Velcro Blocks

OEM GTI Monster Mats Kit

OEM Euro Cupholder

OEM Aluminum bottle opener

OEM Aluminum glove box handle

OEM USB Button Charger

Raceseng Slammer Engraved Shift Knob

Removed Visor Airbag stickers

USP Interior LEDs 6000k

Valentine V1



Audio

Alpine S-Type 6.5" Components up front

Custom Side Mount Fiberglass Sub Box

JL CleanSweep

Memphis 12" Subwoofer (Dual 4 ohm in parallel)

OEM RNS-315

OEM Backup Camera

Rockford Fosgate R400-4D

Rockford Fosgate R250-1D Sub Amp

SOT-976 Wire Harness

A Ton of 16 Gauge Wire

2 Gauge Power Wire



Exterior/Cosmetic

Color Matched Emblem Inserts

Custom Hidden Hitch

DeAutoKey LED Reverse Light

DeAutoKey LED Rear Turn Signals

Ed's Dark Red LED Tailights w/ fog

Ed's Black housing Xenon Headlights

Gloss black front and back emblems

Gloss Black bumper center section

Gloss black grill stripes

LED Mirror Puddle Lights

Morimoto Elite 5000K HID's

Nokya 2500K yellow Fog Lights

OEM Euro-Lip CW

OEM Euro Bumper

OEM Backup Camera

Plasti-dipped rear reflectors

Racing Dash License Plate LED's

Yellow Lamin-x Front Fogs

35% Llumar Tint all around



VAG-COM

Confirmation honk off

DRL disabled

Gauge sweep

Seatbelt chime off

Teardrop wiper

Window up/down with FOB

Other stuff I can't remember...

Looks great! Really dig the engine bay and bikes.

Nice kwaks!

Looks good. #notvortexapproved. :laugh:

how did you get your engine bay to look so organized and clean?

oooooh the black wheels looks nice

Kyle Butler said:

Looks great! Really dig the engine bay and bikes.

Click to expand...

Thanks!

FLtrooper said:

Nice kwaks!

Click to expand...

Love them :wub:

swfloridamk6 said:

Looks good. #notvortexapproved. :laugh:

Click to expand...

Haha I guess not. I love the vortex style thing, but I'd rather go around turns fast

dbutcherMK6 said:

how did you get your engine bay to look so organized and clean?

Click to expand...

Not sure. Just clean really. Could be the picture also.

GTI_likeurmom said:

oooooh the black wheels looks nice

Click to expand...

Thanks! Can't wait to get them on.

HPA dogbone mount installed. I really like it a lot. What I though before was slop/jerkiness from the clutch was actually the POS BSH insert I had. Everything feels much tighter and I feel NO vibrations, even with the BFI motor/trans mounts. HS Tuning has these in stock!! By them!!



And here's a little video on how bad it sucks to try and launch with snows. But at least here's no wheel hop :laugh:

http://youtu.be/o058MtVUJ8I

Some things happened today!
Cleaned wheel wells and turned the coils back down. Fresh painted 710's go on Friday :laugh:


Also picked up some maintenance supplies. Oil/filter. Updated timing tensioner/sealant/crank bolt. And four injector kits in case any of them come out when I take the intake off to clean the valves. Also have 3 bottles of rbf600 to flush my brake fluid. It's going to be a long Friday to say the least!

*****2.0t said:

Click to expand...

This doesn't look like its installed all way in the cavity. I may be wrong because I haven't been under my car since mine was installed but pretty sure it was flush with the bottom of the subframe

GreasyGinzo said:

This doesn't look like its installed all way in the cavity. I may be wrong because I haven't been under my car since mine was installed but pretty sure it was flush with the bottom of the subframe

Click to expand...

You are the second person to say this, but I am positive it's in all the way. Thanks!

*****2.0t said:

You are the second person to say this, but I am positive it's in all the way. Thanks!

Click to expand...

You should send that picture to HPA and see what they say.

It works fine and it's fully up against the dogbone and the bolt is torqued to spec. It's just the picture.

Well I haven't updated this for a while.. First post is all updated with current mods. Since last time, I've completed and installed the brace I made for under the car. Also installed a Deka ETX16L lightweight battery and made a custom braket for that. Finally I ordered a Unibrace XB today. Only thing left for this year is an alignment and new tires!

Xb installed!