Split second
New member
Going after looks and comfort, what do you all recommend. I want to eliminate the gap but don't want to tuck the wheels. My first vw and I want to do it right!! Thanks Dave
6
Coilovers ??
- Thread starter Split second
- Start date
Split second
New member
Koni coilovers? Or shocks?
gti_kev
Go Kart Champion
Split second
New member
Quick question are the part # the same for the gti and R? Make sure I get the right parts for the R..
Carbon//m3
Ready to race!
Hpa shs hands down, they go low and ride like stock. I have a gti as well with neuspeed race springs and Koni's my r ride so much nicer.
Split second
New member
From what I'm reading the koni 1050 5080 part # exc awd??
gti_kev
Go Kart Champion
mine are 1550, but for a gti....
I have mine at lowest setting and have them at full stiff, which is not even that stiff. IMO Lol
Split second
New member
Need model #'s to look up if you have.
Just had a shop install my STs last week and they look n feel great! They go pretty low as well!
I took this picture this past Friday, the day after the install. And, this setup doesn't have spacers either. Judging by the drop, im going to guess that spacers would cause the wheels to rub while corning.
I took this picture this past Friday, the day after the install. And, this setup doesn't have spacers either. Judging by the drop, im going to guess that spacers would cause the wheels to rub while corning.
I had Koni Sport and Eibach Sportline spring on my last GTi MK5
I am now using Bilstein B14 on my MK6. Love it more than my last Koni + Eibach.
The lowest is 25" ftg all round which is ok but I might try to lower the rear by another 1 cm if possible otherwise leave it as it is.
I am now using Bilstein B14 on my MK6. Love it more than my last Koni + Eibach.
The lowest is 25" ftg all round which is ok but I might try to lower the rear by another 1 cm if possible otherwise leave it as it is.