So I purchased a set of oem led tails with a rear fog and I'm having issues here getting it to turn on. I've ran the trigger wire from #7 in the headlight switch harness to #17 in the black cecm. I repined #28 in the black cecm to #47 in the brown cecm and #47 in the brown cecm to #28 in the black cecm. Did the coding to byte 18 to 15 didn't work tried 22 also didn't work I have halogens which is the coding it's supposed to be. I still can't get it to turn on I have a euro switch to. Took it to HS tuning to try and see if they could figure it out. They couldn't get it to work either. HS said most likely the rear fog is defective. The inner driver tail light is only 3/4 months old. I'm really at a loss here an can't figure it out. Not sure if I should just buy a new tail light or not.
Last edited: