VW MK6 GTI Mirror Puddle Lights.

I am offering Pre-Wired MK6 Mirror Puddle lights with OEM connector for direct plug and play with NO SOLDERING REQUIRED.

You will receive the following in the kit:

1 - Pair of Mirror Puddle Lights
2 - OEM connectors on trigger wires already
2 - Ground Wire long enough as well
2 - Wire Tap connectors

Here is pictures of the items:

Make sure your mirror cap has the cut out available:


Mirror lights


Pre Wired OEM connectors


Mirror puddle lights installed on mirror
*please excuse the cuts, they were cleaned before final installation*


video of the lights in action
*flicker of the lights is because the camera, not the Lights themselves.*




You will need vagcom to enable the lights to work, I have used these DIY guides in my journey to install the lights *credit goes to both users for the help.*

http://forums.vwvortex.com/showthread.php?5753916-DIY-Mirror-puddle-light-installation

http://www.golfmk6.com/forums/showthread.php?t=73031

-OnePerfectDose
VAG COM to TURN ON THE PUDDLE LIGHT POWER TO THE WIRES –
A) Open Vag Com and Select “Door Elect, Driver”
B) Select “Coding”
C) Copy and paste your coding values in a word document incase of error.
D) Add 2 to your code and enter the new value. (i.e.-if value is 1020 + 2 = 1022 is the new value)
E) Click “Do It” to save and close the controller.
F) You will need to follow the same Vag Com steps for the Passenger side. Otherwise only one side will light. Use “Door Elect, Pass.” for the passenger puddle lamp.


Price:
$40 Picked up in Orange County, CA (92801)
$45 shipped to 48 states

If local I can also install if needed .

If you have any questions or concerns, please email me or message me
Eurohb@gmail.com

-Bryan