grambles423
Automotive Engineer
http://vager.org/2012/04/10/review-driver-gear-springs-apr-fr-swaybars/
:General Notes
- I used 2DR MK6 Springs
- APR Front set on soft with Rear on Medium
- No axles were dropped during install
- Install time was about 6 hours with two people
- Steering angle wasnt affected during Subframe drop
- S3 bushings were not installed....yet.
- VERY Happy with this setup.
Discuss
:General Notes
- I used 2DR MK6 Springs
- APR Front set on soft with Rear on Medium
- No axles were dropped during install
- Install time was about 6 hours with two people
- Steering angle wasnt affected during Subframe drop
- S3 bushings were not installed....yet.
- VERY Happy with this setup.
Discuss