Sold!
This was JR's (U20T) 5530 Precision turbo setup that I purchased from him and was waiting for files from Unitronic when my wife got in an accident, she's fine but car was totaled. While she was in the hospital, we found out she was pregnant!! So for fortunate and unfortunate reasons, now I have a turbo kit to sell.
This is a great kit and is dyno proven 370whp stock and 470whp with fueling.
What the kit includes:
1. Cast Stainless Steel Manifold T3 Flanged
2. Precision 5530 Ball Bearing Turbo. "E" compressor cover and .63 A/R hot side
3. Internal wastegate setup with 1 bar actuator (the manifold and wastegate with be bolted on and setup already)
4. Stainless Steel v-band downpipe with extra 02 port that can be blocked or used for a wideband.
5. 2.5" turbo outlet piping from turbo to intercooler
6. Synapse diverter valve and diverter relocation
7. BSH throttle body pipe
8. 3.5 inch intake pipe
9. All hardware and clamps
10. Coolant lines
11. Oil lines
Optional Equipment:
1. Eurojet stock location FMIC
What you need:
1. Tune (dynos are all using Unitronic software)
2. Boost Controller
3. Stage one intake or big filter
4. A few misc. items such as vacuum line and boost tap (items most people have already)
5. Fueling system and built motor for over 425hp at the crank. (JR was using IE drop in rods and the Unitronic HO fueling system
Dyno:
http://www.youtube.com/watch?v=ZAeY0KZAjck
JR's original posting:
http://www.golfmk6.com/forums/showthread.php?t=55914
There is no need for a TOP or TB pipe with this kit they are included, meth bung on intake will have a plug in it. To hook up breather without a catch can you would hook up the rear breather on the valve cover to the AN port where the catch can is hooked up.
Price is: $2750 kit
Now reduced to $2650
Reduced again, $2550!!
Buyer pays shipping and paypal fees
Bruce
330-687-3907
This was JR's (U20T) 5530 Precision turbo setup that I purchased from him and was waiting for files from Unitronic when my wife got in an accident, she's fine but car was totaled. While she was in the hospital, we found out she was pregnant!! So for fortunate and unfortunate reasons, now I have a turbo kit to sell.
This is a great kit and is dyno proven 370whp stock and 470whp with fueling.
What the kit includes:
1. Cast Stainless Steel Manifold T3 Flanged
2. Precision 5530 Ball Bearing Turbo. "E" compressor cover and .63 A/R hot side
3. Internal wastegate setup with 1 bar actuator (the manifold and wastegate with be bolted on and setup already)
4. Stainless Steel v-band downpipe with extra 02 port that can be blocked or used for a wideband.
5. 2.5" turbo outlet piping from turbo to intercooler
6. Synapse diverter valve and diverter relocation
7. BSH throttle body pipe
8. 3.5 inch intake pipe
9. All hardware and clamps
10. Coolant lines
11. Oil lines
Optional Equipment:
1. Eurojet stock location FMIC
What you need:
1. Tune (dynos are all using Unitronic software)
2. Boost Controller
3. Stage one intake or big filter
4. A few misc. items such as vacuum line and boost tap (items most people have already)
5. Fueling system and built motor for over 425hp at the crank. (JR was using IE drop in rods and the Unitronic HO fueling system
Dyno:
http://www.youtube.com/watch?v=ZAeY0KZAjck
JR's original posting:
http://www.golfmk6.com/forums/showthread.php?t=55914
There is no need for a TOP or TB pipe with this kit they are included, meth bung on intake will have a plug in it. To hook up breather without a catch can you would hook up the rear breather on the valve cover to the AN port where the catch can is hooked up.
Price is: $2750 kit
Now reduced to $2650
Reduced again, $2550!!
Buyer pays shipping and paypal fees
Bruce
330-687-3907
Last edited: