troutjunkie

Hey DD, Ive got everything hooked up, got the flickering dealt with. But still no LEDs working. I've read some things about wiring pin 10 to pin 12 on the kufatec harness but my kufatec harness doesn't have any wire in pin 12. Does yours ? Also, do you have a highlne cecm? Mines a midline and I'll need to get a highline for the high beams to work. I mostly concerned about the LEDs not working. Thanks for your help

Hey there bud. If they are indeed OEM housings, you will need the kufatec harness- one of the pins in the harness powers the LEDs. As for the flickering, you will need to check you coding. Ed's lights dont really need coding to get them to from what ive read whereas the OEM housings need specific boxes checked. Also, check bit 18, 21, and 24 make sure its correct, or your LEDs wont work. Once i had mine coded properly, they worked fine with no issues.