Search results

60mm white face gauge Controller, solenoid, harness, vacuum lines and solenoid fittings included. Everything works just as it should I don't have the best pictures right now because the car is not in my possession, I will send detailed pics to serious buyers upon request. $300 shipped in the...

Gauging interest in my project, the time has come to move on to something else. ~50k miles, oil has always been changed in 5k intervals and all of the work has been done by either AU Tuning or myself. The car made 599 wheel horsepower on an e47 blend and is an absolute blast to drive. It is the...

I recently bought a set of 17x9 +35 RPF1s because I was under the impression that they would clear my Stoptech 328mm BBK. I saw a few posts on the forum with pics and even a note on AWE's product page for their drag racing setup saying they will clear with a spacer no problem...

A friend of mine is hosting a meet this Saturday from 8am - 12pm, anyone wanna come by? I'll be there in a 600whp mk6, come say hi! https://www.facebook.com/events/920658957977232/ 5829 Balboa Blvd, Encino, CA 91316 Cheers

Garrett T3 GT30/GTX30 (60mm turbine wheel) .63 A/R 4 bolt turbine housing Used for ~10,000 miles, selling because I switched to a .82 $150 shipped to the lower 48

This is for CBFA cars. I'll include some extra brand new 3" pipe (shown in the first pic) The cutout just needs a switch and wire (cheap to buy from QTP) to work. If you don't want to use it you can always just cut it out and use the brand new pipe I'm including with it. The resonator is...

This is only the part before the MAF. You get the filter, heat shield, 90 degree silicone hose, all clamps and mounting hardware. The heat shield has 2 small holed drilled in it to mount my lpfp controller. This will not effect performance at all and can be covered up easily with a small bolt...

I have a set of 4 OEM TSI fuel injectors off a 2012 GTI. 40k miles on them, good working condition. I switched to LNF injectors so I no longer need them. $150 shipped in the lower 48

I'm looking for something cheap (4k neighborhood) that's reliable and slow but still somewhat fun to drive. I've been driving a Prius for a while and it's a fantastic car for what it is however it's just way too boring for my taste. Never realized how massive the impact of driving a gutless...

Selling my ATP GT3076R-WG kit This is with the .64 A/R turbine housing and and 14.7 PSI wastegate actuator. This is the full kit and includes all of the hardware you need to make it work including the intake and outlet pipes, dv relocation, oil/coolant lines, manifold, turbo and so on. You...

Includes: Snow Performance pump + mounting hardware Snow Performance 2.5 gallon tank + mounting hardware AEM v2 progressive controller + new filter for the boost tap 2 check valve jet holders USRT TSI/FSI throttle body spacer + extended bolts AEM Inline filter All the tubing you need Low level...

http://www.42draftdesigns.com/Magnaflow-3-High-Flow-Cat_p_352.html $50 shipped in the lower 48 Sent from my SM-G900V using Tapatalk

Selling my ATP GT3076R-WG kit This is the full kit and includes all of the hardware you need to make it work including the intake and outlet pipes, dv relocation, oil/coolant lines, manifold, turbo and so on. You can reuse whatever intake and downpipe you're currently running (even stock for...

Never used $150 Shipped

Includes: AEM V2 Progressive Controller http://www.aemelectronics.com/?q=products/water-methanol-injection-systems/water-methanol-injection-kit-for-forced-induction-gasoline-engines AEM Failsafe http://www.usrallyteam.com/index.php?main_page=product_info&cPath=68_262&products_id=1845...

Driving home from work, took a right turn kinda fast and it came on. Immediately shut the car off and pulled over. Checked the oil level and it was right where it should be. Turned the car on and started driving again... 2000 rpm in a straight line and it comes on again. 'SHUT ENGINE OFF...

I have a Diesel Geek SS and I'm looking to go back to stock. I want every OEM component that's replaced when upgrading the shifter (nuts, endlinks, and so on) Let me know what you have

Used for ~700 miles Works perfectly but I decided to switch to a vacuum operated diverter valve. $40 shipped to the lower 48 http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=ATP-VVW-212&Category_Code=FSI

Built Big Turbo (3076) GTI from SoCal I figured I’d make a new thread for the second coming of my GTI, the old thread can be found here: http://www.golfmk6.com/forums/showthread.php?t=53717 Back in early May my GTI started idling rough and stalling occasionally after a track event at Willow...

Gentlemen, the time has come for me to part ways with my f23t. This turbo has served me well for the time I've had it and has proven to be an AWESOME match for the TSI engine. It can make 20psi+ around 2900 and hold it all the way to redline which makes for a very broad and ridiculously fun...