Search results

Installed some OEM LED tails! Now it’s time to code.. byte 18 to 21? It’s a 2014 that came w the bi-xenon headlights w LED DRLs..

PM'D

Hey all, This morning, I passed my NYS inspection after having a consistent CEL for a year due to having a catted downpipe on my CBFA motor. I waited a year to address the CEL bc my inspection wasn’t due and I didn’t care about the light but now that it was time, I needed to act. Without the...

Passed inspection! The J spacers were the trick. Could’ve been overkill but it worked

hey, any updates on your end? this thread inspired me to buy these spacers. I installed them yesterday, here's some notes: Background: CBFA motor, ARM catted downpipe. Trying to pass NYS inspection/emissions -initially was on a "stage 2" stratified tune but I reverted back to "stage 1" for the...

True story, my 2000 Civic Si got stolen from my driveway.. came home late from work and didn't block it with my moms car, woke up and it was gawnnnn LOL well i daily'd relatively stock civics for almost 10yrs before I found myself in a GTI so now I want to build the unreliable turbo civic of...

havent done anything to the MK6 but i've been on a project civic youtube rabbit hole the past week and I really want to build a civic hatchback as a project and have the MK6 as a daily. i need a money tree though!!

Stock downpipe out, ARM catted downpipe in! (Along with a “stage 2” Stratified tune. Any recommendations for an O2 spacer? Not sure if 1 reigns supreme.. Job was fairly easy. Only real hiccup was a stray rain shower towards the end of the job. Previous owner had the turbo replaced a few yrs...

H&R sports paired with Koni STR.T. Love the ride, height is perfect but I did install TT rear perches for a more raked look

I just got some 1/4” inner diameter tubing from the hardware store, no special part needed. It was like $0.59/foot

Finally addressed the broken (for 6 months) rear wiper hose. Took more time to drive to the parts store than to fix it. Some people hate on the rear wiper but I love mine Also dropped the car off at the shop for a clutch/RMS job

rear wiper hose must be ruptured, nothing coming out of the nozzle and all the fluid is going into my hatch :( is this an easy fix? looks like it normally happens in the pass thru frrom the hatch to the body under the rubber boot

that intake has the worst fitment, not to mention it doesn't utilize the stock MAF housing so the trims get all messed up. The PCV hose on the inlet came loose and the SAI plug was loose too. If i were you, I'd just send it back and get something with more R&D into it; AFE is more known for...

Woke up super early and installed the roof rack, looks great but the MPG drop is actually unbelievable. Oh well, I’ll take it !

didnt necessarily "do" anything yet but I just got back from a Vegas trip and did really well so I bought myself a euro plate and I'm going to pick up an accessport on monday, woo!

technically true but if you ever put your headlights into service mode via vagcom, you run the risk of running the headlight assembly off the adjusters and then you have to replace or bake them in the oven. flipping the AFS sensor did just fine for me since it was only a mild drop

Nah. When I pulled down the LCA to install the spring, I assume the sensor went straight and just angled the opposite way. I had to unbolt the sensor bracket and flip the sensor back to the original position and that seems to have helped a ton without needing to adjust via OBD11

Well it was yesterday but I installed a used Magnaflow catback, sounds awesome! Not too loud, great exhaust note. Also, fitment is perfect. I Also, finally got a profile shot of my cars stance. H&R sport springs with Audi TT perches. The TT rubber raises the rear a bit more than stock so the...

Update: still can’t adjust thru OBD11 but I did notice my AFS sensor was backwards. I unbolted the bracket, flipped the sensor orientation and it seems to have made a difference.

Hey all, might just have to get an android tablet unless this is a simple fix.. lowered my car last week and my headlights are too low. Upon going into OBD11, control unit 55 (headlight regulation), basic settings and channel 1, I get a “function cancelled, marginal conditions” error. Am I...