Search results

Second to this! Mine has been used for 7 years without any leak

Decides to go for a K04 after all these years. Please let me know if you have one for sale!

H&R 26/22 is fine for my daily use and occasionally spirited driving. HPA 75A puck (insert) and APR dog bone mount were replaced by stock as I want to minimize the NVH. They were not harsh but the car is now a family car most of the time. ;)

I installed one set while fixing coolant leak on my 2011 GTI

Installed a set of H&R sway bar 26 22 years ago, and I remembered the shop said the existing bracket does not fit with the H&R. Are all aftermarket sway bar bracket same size and compatible with stock ?

Just 3 years , think I should inspect it more often

Had so much problems in the past three months, First the stainless steel brake line from Brembo Kit broke (luckily the car was stationary when it happened) Then the coolant reservoir leaked Last week the starter motor died FML

I believe the GTI mk6 is not a good platform to achieve audiophile sound system. Have you tried the mk7, the interior and build quality seems much better then our mk6.

Have you done sound deadening on the MK6? I have put CLD, CCF on headliner and trunk door. Sprayed Second Skin Spectrum on wheel well. Also put some CLD under the rear seat and spare tire area. However I still think the car has a lot of road noise, shall I also do a full treatment (CLD CCF MLV)...

Same set 3 times. First few years ownership I put 28PSI in my tires and now 34-36PSI instead. Can the tire pressure be too low and cause the bending?

What are some good looking budget flow form wheels? My OZ are bent for the third times... (just slightly, I was told after doing wheel balancing)

Got 20 membership points expiring from Shopdap , so I made a purchase with the points. Only took it 3 days to receive from the free shipping service. Highly recommended.

Agree. I'm using the 2nd set of 034 engine mount. feels like Factory NVH

just accidentally saw my own post. I'm not that obsessed ....

Bump after 2 years

After 20k miles of coilover installation (mounts and bearings were also changed), decided to replace the strut mount and strut bearing. As I heard the driver side has noise and feel the small jerky when slow turning. Lots of movement in one side of strut mount and the other side bearing just...

I have been a ECS customer for 6 years. Recently I bought a suspension installation kit for my GTI mk6 and one of the strut mount is labelled wrong and does not fit my car. I have sent them 2 emails and no reply for a whole week, it is always busy with live chat. Finally I got someone reply me...

Im using TVS stage 2 TCU tune and i like it!

i have the same tickling, i thought it is the wastegate rattling? My car is 75,000 miles now, let me check the timing chain reading later

Yes, many reviews for bushing upgrade, not one for a whole car bushing replacement. Anyway, I am going to do the rear part first. Because I changed Superpro LCA and coilover with new strut mount and ball joints in the past 3 years, they should still be holding up