GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Search results

  1. A

    WTB - GTI rear diffuser (preferably maxton design)

    Just as the title states
  2. A

    FS: Maxton Design MK6 Golf R Rear Diffuser

    damn it, i got excited until i realized its for an R
  3. A

    Build your own RSR clutch kit - Parts list

    Also, my plan was to keep the stock clutch until it goes out. However the guy at stratified said if i just drive hard with the new tune until my clutch starts slipping i risk ruining the flywheel which may need to then be resurfaced. My first time hearing that. So i guess its best to just...
  4. A

    Build your own RSR clutch kit - Parts list

    Thats right thanks for the corrections, i tried to list them from off the top of my head instead actually checking. I thought the disk was from the TTRS as well. Interesting, well i ordered the sachs that is listed on the 1st page of this forum so we good.
  5. A

    Build your own RSR clutch kit - Parts list

    Hey guys so i wanna make sure i got everything prepared for my clutch change -keeping stock DMFW -TTRS disk with screws -TTRS pressure plate with screws -Replacing oem RMS with iabed -3 liters tranny fluid Am i missing anything NEEDED for the clutch job? I'll have to open the guide holes on...
  6. A

    MK6 - GTI Factory Clutch and Flywheel Combo - USED

    can you send me pics of your flywheel? 540-209-5206
  7. A

    Build your own RSR clutch kit - Parts list

    So you didn't bother with the iabed RMS, you just got a new OEM one? Or you didn't change it at all? You kept the stock bleeder as well? Or replaced that with an OEM one?
  8. A

    Build your own RSR clutch kit - Parts list

    Do you know if it matters whether or not i have a cbfa or a ccta concerning the rear main seal?
  9. A

    Build your own RSR clutch kit - Parts list

    Gotcha. I really appreciate you giving me the informative answers my friend. Its guys like you that keep these forums on point so i applaud you for that.
  10. A

    Build your own RSR clutch kit - Parts list

    wow like i said my first time hearing this. Is this a common thing that mk6 drivers are doing/have done when changing the clutch? Because i felt like i would have heard or read about it. Is the rear seal one of those things that once you take it off to do the tranny work it never goes back on...
  11. A

    Build your own RSR clutch kit - Parts list

    awesome to hear! Whats the purpose of the rear mainseal and clutch bleeder? My first time ever hearing about that.
  12. A

    Build your own RSR clutch kit - Parts list

    Yea i agree, i went ahead and ordered it. The Honey extension saved me $22 so it ended up being 444 to my door. Can't complain. Now gotta sell the extra disc and TOB lol
  13. A

    Build your own RSR clutch kit - Parts list

    someone mentioned that the FCP one is not a legit sachs kit or something. Know anything about that?
  14. A

    Build your own RSR clutch kit - Parts list

    Cheapest place to get the pressure plate? Best ive found is 410+25 core charge+ 35 shipping so 470 total
  15. A

    ATL Part out ................ you must check this out!

    Pm'd you! Interested in the throttle pipe
  16. A

    Build your own RSR clutch kit - Parts list

    ahhh i gotcha, well thank you for the great input and advise.
  17. A

    Build your own RSR clutch kit - Parts list

    I got 66k on my car now and plan on leaving the stock DMFW. Because if i remember right that thing is about 400-500 bucks. I don't wanna spend that if i don't really need too. But i mean you got 45k and you haven't had an issues so why would you buy a new one if you had to do it over again?
  18. A

    Build your own RSR clutch kit - Parts list

    damn thats really annoying, you used the original DMF or bought a new one?
  19. A

    Build your own RSR clutch kit - Parts list

    I've seen ppl on this thread who have bought them separately, and i got mine separately years ago. Did it become a new thing that they are only sold together now?
  20. A

    Build your own RSR clutch kit - Parts list

    is that price for the pressure plate, TOB, and the clutch disk? Or just the pressure plate?
Top