Boost logs on f23t help

[Raybiggs32]

I'm far from even a novice when it comes to logs. I know my specified and actual should vary too much. Also that timing +\- to far means paper wieght. So I was wondering if anyone could look at my logs and help me out a little.

1st pic
4th gear pull

2nd
3rd gear pull

3rd
3rd gear pull but different data


Set up: barometric: 990
Mk6 gti 6MT
Unitronc stage 2
F23t turbo(very recently installed)
Upgraded clutch
Stock fuel
3in TBE
Unitronic intake
S3 euro intercooler

 

[Admk2]

Well what are you using for tuning software? Because I went the eurodyne route but it took some learning curves.

 

[GIACUser]

What help is it you seek?
Why don’t you get a proper tune for that turbo instead of using one developed for a K03?

 

[kosmaras]

Dude you should NOT be running an F23T with stage 2 software. Boost and timing maps are completely different going from K03 to F23T/K04. Put a K04 base map on and start there.

 

[Grabbit]

Hard to read your logs from a jpg file. Post your logs on Tunezilla here as a first step. Its free and just a drag and drop of the CSV file.

As others mentioned, you'll need a K04 or custom tune for the F23T. Probably best not to get into too much boost on a stage 2 file until this is done.