GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

MAF g/s readings for K04 owners?

J

Jcarollo765

Ready to race!
Just curious what your getting during WOT?

Peaking at 250 with my p-flo and aem dry filter
 
mto386

mto386

Go Kart Newbie
273 g/s logging with a Ross-Tech cable. I got one of those OBDII wireless phone connector things, doesn't seem as accurate as the VCDS. Might just be the app I'm using though.
 
Last edited:
V

valj

Ready to race!
286 g/s Revo Performance B mode (98 RON)

 
V

valj

Ready to race!
V

valj

Ready to race!
Geryon86 said:
How fast were you going?
Click to expand...

I didn't really note that, the logs were made in 3rd gear so I would guess it was around 140 km/h
 
John@Unitronic

John@Unitronic

Go Kart Champion
It's important to have smooth, laminar airflow across the MAF sensor, which is impacted largely by the design of the intake leading up to the MAF sensor. In most cases, you'll notice MAF readings being higher. Check out the intake used in post#2 and post#4, and others, and then take a look at design leading up to the MAF sensor of the intake.

changchewsoon said:
I think I have one of the lowest readings, currently with Unitronic intake, Stage 2+.

Peak reading was only 247 g/s.

Click to expand...

You're right within the range it should be in. :thumbsup:
 
V

valj

Ready to race!
By the way my MAF airflow readings were way off normal levels with my previous Carbonio intake (i was getting up to 310 g/s) and awful fuel trims (up to -15% long term trims)

As soon as I switched to Unitronic's intake everything normalized
 
M

mraaf

Passed Driver's Ed
valj said:
By the way my MAF airflow readings were way off normal levels with my previous Carbonio intake (i was getting up to 310 g/s) and awful fuel trims (up to -15% long term trims)

As soon as I switched to Unitronic's intake everything normalized
Click to expand...



Mine used to be 260-288 g/s. After MAF sensor cleaning, quite consistent at 272 g/s.
 
You must log in or register to reply here.
Top