VagCom Profiles & Instructions For Testing Gasoline, Spark Plugs and Water Methanol

[Velociraptor Thrust]

Lol its cool and all, but they you realize the motor is far from being as efficient as it should be. I'll post a video when I get home.

 

[XGC75]

H/o brb gonna go make a feature request in the Apr 3.1 thread

 

[Velociraptor Thrust]

https://youtu.be/knlhJqBFuVI Yeah not good at all. Not sure why it's just dumping fuel at the top of gears.

 

[reedsposer22]

So what plugs do people prefer for stock mk6 2.0 TSI? between these two options that is:

Spark Plug Recommendations:
Stock turbo (no software), Stage 1 through Stage 2+:
PFR7S8EG Double Platinum (1675) (gapped at 0.032” from the factory):
BKR7EIX Iridium (2667) (gapped at 0.032" from the factory):


PS, thank you for the info HYDE16.

 

[rawcpoppa]

Would these profiles work for other engines within the VW group? Like the 1.4T?

 

[HYDE161]

They will work for all cars that VagCom will work for.

 

[rawcpoppa]

Ok thanks. Planning to use do logging on a twincharger.

 

[supreme_gti]

Spark Plug Recommendations:
Stock turbo (no software), Stage 1 through Stage 2+:
PFR7S8EG Double Platinum (1675) (gapped at 0.032” from the factory):
BKR7EIX Iridium (2667) (gapped at 0.032" from the factory):

APR K04 V3.1:
BKR8EIX Iridium (2668) (gapped at 0.032 from the factory, re-gap to 0.026”)

Other K04:
PFR7B Double Platinum (4853) (gapped at 0.028”):
PFR7Q Double Platinum (7963) (gapped at 0.032 from the factory, re-gap to 0.028”):

APR Stage 3:

APR Stage 3+:
BKR8EIX Iridium (2668) (gapped at 0.032 from the factory, re-gap to 0.028”)

Other K04:
PFR7B Double Platinum (4853) (gapped at 0.028”):
PFR7Q Double Platinum (7963) (gapped at 0.032 from the factory, re-gap to 0.028”):

Whats the difference between these two? I am running an other KO4 setup and I want to try one of these out. Running stage 2 Unitronic ECU tune.
Currently running BKR8EIX Iridium (2668).

 

[GolNat]

Other K04:
PFR7B Double Platinum (4853) (gapped at 0.028”):
PFR7Q Double Platinum (7963) (gapped at 0.032 from the factory, re-gap to 0.028”):

Whats the difference between these two? I am running an other KO4 setup and I want to try one of these out. Running stage 2 Unitronic ECU tune.
Currently running BKR8EIX Iridium (2668).

PFR7B - 5K ohm resistor
PFR7Q - 1k ohm resistor

That’s the only difference.

I run the BKR7EIX (2667) Unitronic K04 tune.

 

[supreme_gti]

PFR7B - 5K ohm resistor
PFR7Q - 1k ohm resistor

That’s the only difference.

I run the BKR7EIX (2667) Unitronic K04 tune.

I am going to test both.
PFR7B - 5K ohm resistor
PFR7Q - 1k ohm resistor

I had BKR7EIX before the BKR8EIX set. Still had misfires logged. Trying to see if I switch to different plugs if it will eliminate misfires