VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com

VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com (https://www.golfmk6.com/forums/index.php)
-   Golf R 2.0T Engine / Drivetrain / Exhaust / Tunes (https://www.golfmk6.com/forums/forumdisplay.php?f=68)
-   -   Adjustable Rear Control Arms (https://www.golfmk6.com/forums/showthread.php?t=49240)

tamz273 11-16-2012 09:16 AM

Adjustable Rear Control Arms
 
So Im looking for control arms that will allow me to adjust the camber/caster on the rear wheels.. I saw the MadMaxx ones, but cant seem to find a set for the MK6/Golf R..

Im not even sure that the R uses the same ones as the R (AWD vs FWD)

Advice?

tamz273 11-18-2012 12:12 AM

Bumpity bump..!

Talguy 11-18-2012 09:13 AM

http://www.meganracingperformance.co.../control-arms/

your welcome

Halvie 11-18-2012 10:27 AM

Quote:

Originally Posted by Talguy (Post 916539)

lighter than stock?

TXBDan 11-18-2012 10:33 AM

Hrmm those prices aren't bad at all. And the rubber bushing would be street friendly.

Talguy 11-18-2012 10:42 AM

Quote:

Originally Posted by Halvie (Post 916576)
lighter than stock?

Halvie, they're forged aluminum so I would assume they're a bit lighter than stock.

Halvie 11-18-2012 11:44 AM

Quote:

Originally Posted by Talguy (Post 916581)
Halvie, they're forged aluminum so I would assume they're a bit lighter than stock.

Nice. Will probably give them a shot. Thanks for the link++

DBESTGTI 11-18-2012 02:11 PM

camber is adjustable on the rear from the factory

rizzogti 11-18-2012 02:13 PM

Quote:

Originally Posted by DBESTGTI (Post 916748)
camber is adjustable on the rear from the factory

this... however i do know that the R seems to get less camber adjustment than the gti's do.

i hear IDF rear control arms can make alot of camber. but they are pretty pricey.

Talguy 11-18-2012 03:21 PM

Quote:

Originally Posted by DBESTGTI (Post 916748)
camber is adjustable on the rear from the factory

I know rear is adjustable but I thought you only had two settings since its flipping and oval washer.

DBESTGTI 11-18-2012 08:02 PM

no

http://949racing.com/ProductImages/M...ntric_bolt.jpg


The hole in the washer is offset, as you turn the bolt it spins the washer, it's infinitely adjustable in between the minimum and maximum spots

tamz273 11-19-2012 10:09 AM

Thanks for the info guys.. Maybe Ill try to use the stock parts to adjust the camber before I buy any more parts.. Im sitting 24.75 FTG.. will stock suffice?

EDIT:
Ive been told from my vendor that he stopped selling Megan Racing due to quality complaints from clients.. Any other suggestions?


All times are GMT -4. The time now is 06:02 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.