View Single Post
Old 09-09-2012, 02:07 PM   #289
Formula 5000 Champion
zVp's Avatar
Drives: 2012 Black GTI (DSG)
Join Date: Jun 2011
Location: GTA, Canada
Posts: 2,856
Enable Tear Drop Wiping for Front Window

WARNING: I will not be held liable if anything occurs when attempting to change anything in the VCDS software. These instructions are created to the best of my knowledge and are as accurate as I can make them. Please be careful before you save your settings and always run Auto-Scan before any changes are attempted.

Load up VCDS, click on the Select button under Select Control Module

Click on the 09-Cent. Elect. button

Click on the Coding - 07 button

Use the drop-down menu and click on the Wischer entry (this may be different depending on your module, but it should say Wischer or something similar)

Click on the Long Code Helper button

Go to Byte 01 and check mark Bit 3 - Tear Wiping active to activate this option
DSG | APR Stage 1 | DriverGear Springs
zVp's Car Journal
zVp is offline   Reply With Quote