GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

The Golfmk6 Wheel/Fitment Info Thread!

Wastegate13

Autocross Champion
Is it possible to fit a 18x9.5 Et45 all the way around?

No. It won't clear the front suspension. Gonna need a spacer up front. 5-8mm depending on what suspension you are on.
 

Outkasted24

Hoping to Own a GTI Soon
Then what if I do a 18x9.5 et35 square setup, Still have to do a small spacer in the front?

Any Idea how close to the fender it will sit in the front?
 
Last edited:

Wastegate13

Autocross Champion
Then what if I do a 18x9.5 et35 square setup, Still have to do a small spacer in the front?

Any Idea how close to the fender it will sit in the front?

This is 18x9.5 +32 with a 205/40. 35 will work without a spacer.

 

rizzogti

Go Kart Champion
anybody tucking 17x9 et 25?

got some dope wheels in mind! how much camber would i need with a 205/40?

-4?

17x9 et25 on the rears? that's doable. that's around what my specs on my LMs were...
This is at -4.5 degrees camber.. tucked when i air'd out.



This was when i only had -4 degrees camber

 
does that low profile jack really work on low? like the frame off the ground iphone height. I have to use wooden blocks, drive up on them, then get my jack under the car. I would love to just slide the jack under and have none of these issues.
 

xHeartcoreboyx

IceCream GTI
I have recently bought a spanish made jack that easily goes under my frame...heck the jack's bottom has scrape marks from being dragged out of our storage room..its that low....


Sent from my iPhone with typos
 

Mdiesel

Passed Driver's Ed
Looking to run a 18x9.5 +40 in the front. I'm low on FK streetlines.
How can i make it work without killing my fender (screw mod and rolling already done)


DSC_0147 by Mdiesel64, on Flickr
 
Top