GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Parking lights always on

S

shenhav

New member
I would like to know how to make that the parking lights will be always on when the light swich will be on 0 (off) , when the ignition swich is on electric mode.
I would rather do it by vagcom

Thanks ahead :thumbup:
 
Brinkmen

Brinkmen

VW NUT!
I'm interested in doing this also. Sub'ed.
 
zrickety

zrickety

The Fixer
You can't do it with vag-com. You will need to wire it up directly or with a relay.
 
Jason3D

Jason3D

Go Kart Champion
Sounds like you're asking if you can use parking lights as DRL's. Not sure if you can vag com that or not. Another option is to install euro switch that has a position for parking lights only, however tails will be on at the same time.
 
eduardot

eduardot

Ready to race!
I believe there is a way to do it by changing the Byte 18 value. Some other countries have front DRLs and always-on tailights (like rear drls). If I remember correctly, some guy had this on vwvortex a while back and he was using a Scandinavian code.

Look for a list of all the valid byte 18 values (there's a few threads with it)
 
S

shenhav

New member
eduardot said:
I believe there is a way to do it by changing the Byte 18 value. Some other countries have front DRLs and always-on tailights (like rear drls). If I remember correctly, some guy had this on vwvortex a while back and he was using a Scandinavian code.

Look for a list of all the valid byte 18 values (there's a few threads with it)
Click to expand...



xd-data-ii said:
Turn on byte 24 bit 7 to set drl as parking lights.
Also set byte 15 bit 6
Click to expand...



Could be more detailed explanation? Or Guide?
Link to post how to do? (I was looking and found)
Pictures of some bits to change?

:):):):):):)
 
You must log in or register to reply here.
Top