GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

** Euro Sport Accessories Exhaust, Downpipe, and Intakes - VW® MK6 GOLF GTI 2.0T **

Status
Not open for further replies.

Hubert@EuroSport

New member


Euro Sport Exhaust System - VW® MK6 GOLF GTI 2.0T



Euro Sport Exhaust System - VW® MK6 GOLF GTI 2.0T

"The all new Euro Sport performance exhaust system for the Mk6 GTI 2.0T is here.
Made in the USA from mandrel bent T304 stainless steel 2.5" tubing for the best power and torque.
100% stainless steel muffler with perforated core for smooth unrestricted flow.
Dual angle cut 3.5" T304 polished stainless steel tips with etched Euro Sport logos.
Our design uses slip joints with stainless steel band clamps for easy installation."
Bolt-On Performance, with installation instructions


Fitment:
VW® Mk6 Golf GTI 2.0T - 2010 2011 2012 2013 2014



info/order here: Euro Sport MK6 GTi 2.0T Exhaust





video/sound clip: http://youtu.be/5xTIJo6B6GI

:thumbup: info/order here: Euro Sport MK6 GTi 2.0T Exhaust :thumbup:



..undercarriage shot


 

Hubert@EuroSport

New member
Euro Sport Accessories 3" Downpipe

Euro Sport Accessories Stainless Steel 3” DP - VW® MK6 2.0T



Euro Sport Stainless Steel 3" DP - VW® MK6 2.0T




info/order: Euro Sport SS 3" downpipe - VW® MK6 2.0T

Euro Sport's downpipe for the VW® MK6 2.0T is constructed of tig-welded 16-gauge 3" mandrel bent T304 stainless steel tubing.
A 3" stainless steel Hi-Flo (400 cell count) catalytic converter is built-in, three stainless steel oxygen sensor fittings,
and a stainless steel OE style 8" long flex joint into our design.
The connecting flange is ‚3/8" thick laser-cut stainless steel.
Dyno tested to give you a gain of approximately 10-12 WHP and 15-20 WTQ.
This is a bolt-on two piece design, and downsizes to fit the stock system or our 2.5" performance exhaust system.
Backed by a 6 month warranty against manufacturing defects and workmanship.

Note: Some vehicles may have a check engine light with this downpipe because of the high flow catalytic converter, this may be resolved with ECU programming.


***NOTE: DUE TO C.A.R.B. RESTRICTIONS, THIS ITEM IS CURRENTLY NOT FOR SALE IN CALIFORNIA ***

Fitment:

VW® Mk6 GTI 2.0T 2010 2011 2012 2013
VW® Mk6 GLI 2.0T 2011 2012 2013


info/order: Euro Sport SS 3" downpipe - VW® MK6 2.0T :thumbsup:​
 

Hubert@EuroSport

New member
Euro Sport Accessories Race Intake (ITGfilter)

Euro Sport Cool-Flo Race Intake (ITGfilter) - VW® MK6 2.0T​




Euro Sport Cool-Flo Race Intake (ITG Filter) - VW® MK6 2.0T

These are true "cold air" intake systems that situates the filter in the lower front region of the car, away from ALL engine heat.
The Cool-Flo Race system utilizes 3" mandrel bent steel tubing along with laser cut bracketry.
Other features include all tig-welded construction. We supply an ITG Maxogen air filter for the best possible flow and filtration.
Factory mounting points are utilized for installation without the need for permanent modification or fabrication.
All Cool-Flo intakes come with a Limited Lifetime Warranty to the original purchaser.

Euro Sport Race Intake Tube
Mandrel bent steel construction
Powder coated finish
Tig-welded

Easy to clean connecting hoses
High temperature resistant
Three ply silicone construction
Oil resistant

Induction Technology Group (ITG) foam air filter
Three layer reticulated polyester foam element
Pre-oiled with ITG dust retention coating
Optimal filtration of particles as small as 10 microns


LIFETIME WARRANTY

Fitment

VW® VW Mk6 Golf GTI 2.0T 2010 2011 2012 2013
VW® VW Mk6 Jetta GLI 2012 2013


:thumbup: info/order here: MK6 2.0T Euro Sport Cool-Flo Race Intake (ITG Filter):happyanim:





info/order here: MK6 2.0T Euro Sport Cool-Flo Race Intake (ITG Filter)
 

Hubert@EuroSport

New member
Euro Sport Accessories Race Intake (Green Filter)

Euro Sport Cool-Flo Race Intake (Green Filter) - VW® MK6 2.0T



Euro Sport (Green Filter) Cool-Flo Race Intake - VW® MK6 2.0T

These are true "cold air" intake systems that situates the filter in the lower front region of the car, away from ALL engine heat.
The Cool-Flo Race system utilizes 3" mandrel bent steel tubing along with laser cut bracketry. Other features include all tig-welded construction.
Factory mounting points are utilized for installation without the need for permanent modification or fabrication.
All Cool-Flo intakes come with a Limited Lifetime Warranty to the original purchaser.

Euro Sport Race Intake Tube
Mandrel bent steel construction
Powder coated finish
Tig-welded

Easy to clean connecting hoses
High temperature resistant
Three ply silicone construction
Oil resistant

Green Air Filter
• Extra pleats used for maximum surface area
• Super strength to withstand engine intake pressure
• Comes pre-oiled with Green Filter Oil
• Limited lifetime guarantee


Fitment
VW® VW Mk6 Golf GTI 2.0T 2010 2011 2012 2013
VW® VW Mk6 Jetta GLI 2012 2013


:thumbup: info/order here: MK6 2.0T Euro Sport Green Filter Cool-Flo Race Intake :happyanim:






(kit pictured above, with optional ITG Filter)

info/order here: MK6 2.0T Euro Sport Green Filter Cool-Flo Race Intake
 
Status
Not open for further replies.
Top