GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV
VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com



Go Back   VW GTI MKVI Forum / VW Golf R Forum / VW Golf MKVI Forum / VW GTI Forum - Golfmk6.com > Technical Topics > Cosmetic Mods (interior & exterior modifications)


Reply
 
Thread Tools Search this Thread Display Modes
Old 09-21-2018, 11:35 AM   #15
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
Quote:
Originally Posted by Carlosfandango View Post
What is this a picture of??




Sent from my iPhone using Tapatalk


That picture is pin 6 in t52a and that blue and yellow wire goes to pin 12 of the left headlamp connector.
geramy1232 is offline   Reply With Quote
Old 09-21-2018, 11:38 AM   #16
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
Quote:
Originally Posted by Carlosfandango View Post
Have you checked your bcm to see if plug A has pins 6 and 44? Iíve just realised Iíve given you this info before
BI-XENON HEADLIGHT HELP!
https://r.tapatalk.com/shareLink?sha...4&share_type=t


Sent from my iPhone using Tapatalk


Lol yeah I know, and I still havenít got them to turn on unfortunately. Pin 6 on t52a goes to pin 12 on the left headlamp connector and pin 44 on t52a is a red and grey that goes to pin 10 on the right side headlamp connector.
geramy1232 is offline   Reply With Quote
Old 09-21-2018, 11:43 AM   #17
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126


This is headlight connector t14F (right side)


This is headlight connector t14e(left side)




Sent from my iPhone using Tapatalk
geramy1232 is offline   Reply With Quote
Old 09-21-2018, 12:32 PM   #18
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
Coding wise, if I remember correctly there is more than one ďbyteĒ that has a ďbitĒ that needs changing to accept the led retrofit, but I just canít get my head around what youíve got there without actually looking at it! If youíre 100% sure the wiring is correct then it must be coding, maybe another bit needs deactivating somewhere?? Do you have the AFS and levelling etc fitted? Were your previous xenons factory fitted??


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-21-2018, 12:35 PM   #19
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
Also are you sure thatís t52a and not t52c? And as Iíve already asked (and I suspect this is the issue) does the actual bcm have the pins in it for the LED wires??? NOT the plug, THE BCM!!


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-21-2018, 12:42 PM   #20
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
Quote:
Originally Posted by Carlosfandango View Post
Coding wise, if I remember correctly there is more than one ďbyteĒ that has a ďbitĒ that needs changing to accept the led retrofit, but I just canít get my head around what youíve got there without actually looking at it! If youíre 100% sure the wiring is correct then it must be coding, maybe another bit needs deactivating somewhere?? Do you have the AFS and levelling etc fitted? Were your previous xenons factory fitted??


Sent from my iPhone using Tapatalk


Yes the car came with the AFS and leveling fitted and the bi-xenon were factory fitted. I also just donít know what coding to use.
geramy1232 is offline   Reply With Quote
Old 09-21-2018, 12:45 PM   #21
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
Quote:
Originally Posted by Carlosfandango View Post
Also are you sure thatís t52a and not t52c? And as Iíve already asked (and I suspect this is the issue) does the actual bcm have the pins in it for the LED wires??? NOT the plug, THE BCM!!


Sent from my iPhone using Tapatalk


T52a is the black on and t52c is the golden one. And as for the pins I believe they do since in the wiring diagram, it says that pins for the left daytime running lamp and parking led module are from t52a/6 that goes to t14e/12 and from t52c/26 to t14e/10 and my wiring is the same way so I believe it has the pins.
geramy1232 is offline   Reply With Quote
Old 09-21-2018, 01:02 PM   #22
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
LED DRL CODING ISSUES

Quote:
Originally Posted by geramy1232 View Post
T52a is the black on and t52c is the golden one. And as for the pins I believe they do since in the wiring diagram, it says that pins for the left daytime running lamp and parking led module are from t52a/6 that goes to t14e/12 and from t52c/26 to t14e/10 and my wiring is the same way so I believe it has the pins.


Check that the pins are actually there, Remember! Presumption is the mother of all f&@k ups!

If they are there then itís a pretty good chance that the coding is to blame,

Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-21-2018, 01:52 PM   #23
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
I posted this earlier on your old thread by accident, Iíve had a link to this post saved for a long time but didnít realise I still had it! I think it could be the answer to your prayers.

Be sure to confirm your BCM has the pins needed

http://forums.ross-tech.com/showthre...FS-retrofitted


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-23-2018, 12:50 PM   #24
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
LED DRL CODING ISSUES

Quote:
Originally Posted by Carlosfandango View Post
I posted this earlier on your old thread by accident, Iíve had a link to this post saved for a long time but didnít realise I still had it! I think it could be the answer to your prayers.

Be sure to confirm your BCM has the pins needed

http://forums.ross-tech.com/showthre...FS-retrofitted


Sent from my iPhone using Tapatalk


Yeah Iíve read that post and tried the coding he has and nothing lol. I have also checked the bcm pins and they are all there. Only thing different is what I had said before. Pin 48 and 49 of t52c are supposed to be from pin 48 in pin 5 of t52a and pin 49 in pin 46 of t52c according to this diagram about the led drl headlight but that is about it.

geramy1232 is offline   Reply With Quote
Old 09-23-2018, 12:53 PM   #25
geramy1232
Oval Newbie
 
geramy1232's Avatar
 
Drives:
Join Date: Jun 2015
Posts: 126
This is what I have currently, so According to the diagram I need to change them from 48 to 5 t52a and 49 to 46 t52c
geramy1232 is offline   Reply With Quote
Old 09-23-2018, 01:13 PM   #26
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
All you can do is try I guess! but be sure to check those wires are the ones that go to the headlights first, if I had the car in front of me itíd be easy to sort it out but from over the internet it can become a little confusing to say the least!


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-23-2018, 01:16 PM   #27
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
Hang on! Those wires are for the xenon shutter!! Donít move them.


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
Old 09-23-2018, 01:21 PM   #28
Carlosfandango
FIA GT Champion
 
Carlosfandango's Avatar
 
Drives: 2010 MK6 GTI 6MT - 2016 MK7 GTi DSG
Join Date: Dec 2016
Location: UK
Posts: 1,104
I donít think you realise that you need to ADD the led wires yourself, they wonít be there.


Sent from my iPhone using Tapatalk
Carlosfandango is offline   Reply With Quote
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:08 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.