tkelly0727
Ready to race!
Right, they dropped the price twice so far. I wanted the R1 but i was too late and the R2 will be too much for A daily
6
Jay's 13' Wolfsburg Track Car Build
- Thread starter jay745
- Start date
Right, they dropped the price twice so far. I wanted the R1 but i was too late and the R2 will be too much for A daily
jay745
What Would Glenn Danzig Do
Great weekend at grattan. The car did great and I was able to smoke my prior PB with a 1:33.16. prior was 1:37.xx. on the old suspension and before I did all poly bushings. I was really hoping the new setup was going to pay off and it did big-time. I'm so happy with how the cat behaves now.
Didn't have any overheating issues either. Amazing
Sent from my SM-G960U using Tapatalk
Didn't have any overheating issues either. Amazing
Sent from my SM-G960U using Tapatalk
jay745
What Would Glenn Danzig Do
The oem one. Made it ~80k miles. I'll be replacing it with the aluminum graf pump.
torga
Autocross Champion
Yesssss.
Roadrunner_GTI
Drag Racing Champion
I'm in the same boat, but there may be some hope...
Apparently someone is experimenting with bolting a CBFA thermostat housing (with the extra sensor) to a Graf aluminum CCTA water pump. The thermostat housings between the CCTA and CBFA are shaped slightly different where they insert into the pump housing, but it looks like it's possible to modify the water pump slightly with a small grinder / dremel to work. I'll have more details in the coming weeks.
Last edited:
jay745
What Would Glenn Danzig Do
I overlooked a few updates and forgot to post here. Oil cooler has been mounted and installed. Next up is the Graf aluminum water pump.
Parts list for the pieced together oil cooler below for reference.
It's a Setrab Series 6 19 row oil cooler
https://www.pegasusautoracing.com/productdetails.asp?RecId=8948&utm_source=google&utm_medium=cpc&utm_campaign=SET-619-4064&gclid=CjwKCAjwg-DpBRBbEiwAEV1_-K779h_EqTSgNGUS0P-u4JMauco2plu9OxH3gbOmX_TNfpVAcUgUmhoCOboQAvD_BwE
Setrab mount
https://www.pegasusautoracing.com/productdetails.asp?RecID=9007
Mocal SP1 Sandwich Plate with 175 degree oilstat
https://www.pegasusautoracing.com/productdetails.asp?RecID=27366
(2)1/2" BSP to 8AN adapters
https://www.pegasusautoracing.com/productdetails.asp?RecID=27372
8AN hose ~ 5 feet
Can't remember where I ordered this from but any 8an hose will work.
(4) 8AN fittings to make the lines, depending on where you mount the cooler will dictate which angles you need.
Misc screws/self tapping screws from home depot to mount the cooler.
Parts list for the pieced together oil cooler below for reference.
It's a Setrab Series 6 19 row oil cooler
https://www.pegasusautoracing.com/productdetails.asp?RecId=8948&utm_source=google&utm_medium=cpc&utm_campaign=SET-619-4064&gclid=CjwKCAjwg-DpBRBbEiwAEV1_-K779h_EqTSgNGUS0P-u4JMauco2plu9OxH3gbOmX_TNfpVAcUgUmhoCOboQAvD_BwE
Setrab mount
https://www.pegasusautoracing.com/productdetails.asp?RecID=9007
Mocal SP1 Sandwich Plate with 175 degree oilstat
https://www.pegasusautoracing.com/productdetails.asp?RecID=27366
(2)1/2" BSP to 8AN adapters
https://www.pegasusautoracing.com/productdetails.asp?RecID=27372
8AN hose ~ 5 feet
Can't remember where I ordered this from but any 8an hose will work.
(4) 8AN fittings to make the lines, depending on where you mount the cooler will dictate which angles you need.
Misc screws/self tapping screws from home depot to mount the cooler.
uglybastard
Autocross Champion
how big of a difference are you seeing with this oil cooling setup?
jay745
What Would Glenn Danzig Do
I haven't been on the track with it yet so I don't really know. I'll definitely post feedback though after that happens.
riceburner
Autocross Champion
looks like a real nice setup dude!
Roadrunner_GTI
Drag Racing Champion
I overlooked a few updates and forgot to post here. Oil cooler has been mounted and installed. Next up is the Graf aluminum water pump.
Parts list for the pieced together oil cooler below for reference.
It's a Setrab Series 6 19 row oil cooler
https://www.pegasusautoracing.com/productdetails.asp?RecId=8948&utm_source=google&utm_medium=cpc&utm_campaign=SET-619-4064&gclid=CjwKCAjwg-DpBRBbEiwAEV1_-K779h_EqTSgNGUS0P-u4JMauco2plu9OxH3gbOmX_TNfpVAcUgUmhoCOboQAvD_BwE
Setrab mount
https://www.pegasusautoracing.com/productdetails.asp?RecID=9007
Mocal SP1 Sandwich Plate with 175 degree oilstat
https://www.pegasusautoracing.com/productdetails.asp?RecID=27366
(2)1/2" BSP to 8AN adapters
https://www.pegasusautoracing.com/productdetails.asp?RecID=27372
8AN hose ~ 5 feet
Can't remember where I ordered this from but any 8an hose will work.
(4) 8AN fittings to make the lines, depending on where you mount the cooler will dictate which angles you need.
Misc screws/self tapping screws from home depot to mount the cooler.
Couple questions Jay...
The Mocal SP1 Sandwich plate you linked doesn't have a thermostat. The correct part# for the one with thermostat is SP1T
http://50.62.235.225/files/sp1t.pdf
As a side note, they also have the sandwich plate designed for the TSI, which is part# SP1T-TSI
The oil cooler you linked to has -16 O-ring ports? Or did you go with the one that has 22M ports, and then use 22M to 8AN adapters?
https://www.pegasusautoracing.com/productdetails.asp?RecID=8947
Thanks!
Ronnie
jay745
What Would Glenn Danzig Do
ah crap you're absolutely right on the sandwich plate. I linked the wrong one, I do have the one with built in oilstat.
on the cooler question I'll have to confirm the part# later when I get home.