6
COBB tuning?!
- Thread starter sauceman101
- Start date
SirClimax
Ready to race!
You should ask the guys at AU Tuning what it would cost to get a dyno-tune while you are there Saturday.
havocsrt
Ready to race!
CarniifeX
Go Kart Champion
They told Corey and I it would be $500, when were in Vegas at Wuste.
CarniifeX
Go Kart Champion
Eventually they will release v103 to everyone, yes.
Nkbanta
Passed Driver's Ed
Stage2Sasquatch
Go Kart Champion
-3 is normal for these cars. It's no problem. Anything than -5 should be looked at.
Justin@Freektune
Passed Driver's Ed
Most of the time, the -3 happens on spool up and is mechanical noise picked up by the knock sensor. Are you able to capture when the -3 occurs
Sent from my iPhone using Tapatalk
Stage2Sasquatch
Go Kart Champion
I'm on my laptop so I don't have my MK6 logs, but here's my MK7 logs (Nearly the same): http://datazap.me/u/goingnowherefast/jb1-50-psi-e153rd-4th-wot?log=0&data=0-1-4-5-6-7-8
Basically it's during spool up. MK6 logs show the same.
CarniifeX
Go Kart Champion
Here are my three dyno pulls. The guy running the show said that 'component protection' kicked in during the mid to upper 6000's.
From what I could read on the monitor, I saw 250whp and 280 wtq.
1: http://www.datazap.me/u/carniifex/dyno-day-071616?log=0&data=20
2: http://www.datazap.me/u/carniifex/dyno-day-071616?log=1&data=20
3: http://www.datazap.me/u/carniifex/dyno-day-071616?log=2&data=20
From what I could read on the monitor, I saw 250whp and 280 wtq.
1: http://www.datazap.me/u/carniifex/dyno-day-071616?log=0&data=20
2: http://www.datazap.me/u/carniifex/dyno-day-071616?log=1&data=20
3: http://www.datazap.me/u/carniifex/dyno-day-071616?log=2&data=20
theclutch
Go Kart Newbie
Could you remind us what you're running again in terms of Stage 1, 1+, 2, etc.?
Thanks for sharing!