GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Front door removal

bentegrity

New member
It’s way easier than I thought it would be. I did fine with just a simple set of shims from Harbor Freight. Those linked guides above were all I used for reference too. The only thing I’d suggest is not doing it if it’s cold/freezing, or you’ll surely break the clips.


Sent from my iPhone using Tapatalk
 

Jeffs2013GTI

Drag Race Newbie
Only bad thing about taking doors off is you usually if not always get a rattle or a creak you didn't have before.

So have some extra clips on hand just in case, and try to put everything back the best you can.

Some people dont mind rattles and such, they drive me crazy.


Jeff
 

bentegrity

New member
Only bad thing about taking doors off is you usually if not always get a rattle or a creak you didn't have before.



So have some extra clips on hand just in case, and try to put everything back the best you can.



Some people dont mind rattles and such, they drive me crazy.





Jeff



Good point. I made sure to test that as best as I could by banging the door lightly to find any rattles, then just zip tie the loose bundles of wire if there are any.


Sent from my iPhone using Tapatalk
 
Top