GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

DIY: Install deAutoKey puddle LEDs into OPD turn signal housing

jerome99

Go Kart Champion
Pictorial on how I installed deAutoKey's Puddle housing LEDs into OnePerfectDose's sequential turn signal housings.

The light housing came in nice anti static bags.



Decent quality.





I just popped the old light housing out of the turn signal housings with a plastic trim removal tool. It didn't take much effort to remove them so there is little risk of damaging anything.



I glued the new LED housing in with black silicone adhesive.



I clamped them in place until the silicone cured enough to not move then I went on to the other.



Letting both sit until completely dry.



Left how they shipped, right with the new housing.



Took 15 minutes to get them to the point of needing to be clamped down. Dry time depends on glue and environment.
 
Last edited:
Top