GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Help! OPT7 LED lights in halogen housing?

nitro329

New member
Has anyone installed the OPT7 LED lights in the halogen housing?

I didn't check to see how the lights go into the low beam housing (I know, I know, amateur mistake) and I was just wondering if anyone got these to work and fit nicely so they won't fall out. I have an idea regarding the quick disconnect, but I can't seem to get it off, without fear of breaking it.

Any tips/tricks/or even install guides would be great!

These are the lights I am talking about
http://www.amazon.com/OPT7-Headligh...?ie=UTF8&qid=1460377941&sr=8-1&keywords=opt+7
 

GTIROCKet

Ready to race!
No led will fit because you will need bulb adapter to pop them in and with led they have a back piece like a fan or something and it fit in the adapter, you'll have to go with HID kit, like deautokey, that's what I went with because you'll need a canbus kit to keep them on
 

deAutoLED.com

GolfMK6 Official Vendor
No led will fit because you will need bulb adapter to pop them in and with led they have a back piece like a fan or something and it fit in the adapter, you'll have to go with HID kit, like deautokey, that's what I went with because you'll need a canbus kit to keep them on

Thanks for suggesting our company.

We had an LED model with the adapter built in, testing showed that they are just not bright enough and the beam angle is not the best - stick with the H7RC and gain as much visibility as a projector and a cleaner cut-off:
http://deautokey.com/product/mk7-gt...kit-full-set-including-adapters-and-resistors

this is projectors/h7rc side:23: by side - you cannot tell the difference:
Here are some pictures of the 5,500k D1S bulbs in my car and deAutoKey's 6,000k H7RC kit in my friend's grey MK6.



5,500k D1S in OEM Projector on left.
6,500k H7RC in OEM Reflector on right.







 
Top