GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Engine Fault Code - Help me!

JiunYaw

New member
001089 - EVAP Emission Control Sys: Incorrect Flow
P0441 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 3
Mileage: 36797 km
Time Indication: 0
Date: 2015.14.27
Time: 22:06:18

Freeze Frame:
RPM: 842 /min
Load: 32.5 %
Speed: 0.0 km/h
Temperature: 95.0∞C
Temperature: 51.0∞C
Absolute Pres.: 990.0 mbar
Voltage: 13.716 V

000135 - Fuel Rail/System Pressure: Too Low
P0087 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Mileage: 36675 km
Time Indication: 0
Date: 2015.14.25
Time: 12:25:20

Freeze Frame:
RPM: 866 /min
Load: 40.0 %
Speed: 0.0 km/h
Temperature: 98.0∞C
Temperature: 71.0∞C
Absolute Pres.: 990.0 mbar
Voltage: 13.208 V

000370 - Fuel Trim; Bank 1: System Too Rich
P0172 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 1
Mileage: 36678 km
Time Indication: 0
Date: 2015.14.25
Time: 12:40:56

Freeze Frame:
RPM: 843 /min
Load: 36.5 %
Speed: 0.0 km/h
Temperature: 96.0∞C
Temperature: 64.0∞C
Absolute Pres.: 990.0 mbar
Voltage: 13.462 V

004917 - Engine Torque Monitor 2: Control Limit Exceeded
P1335 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 12
Mileage: 37291 km
Time Indication: 0
Date: 2016.14.06
Time: 20:47:46

Freeze Frame:
RPM: 1604 /min
Load: 52.9 %
Speed: 32.0 km/h
Temperature: 93.0∞C
Temperature: 45.0∞C
Absolute Pres.: 1000.0 mbar
Voltage: 13.843 V

000136 - Fuel Rail/System Pressure: Too High
P0088 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 0
Fault Frequency: 2
Mileage: 36748 km
Time Indication: 0
Date: 2015.14.26
Time: 19:19:48

Freeze Frame:
RPM: 897 /min
Load: 20.4 %
Speed: 13.0 km/h
Temperature: 94.0∞C
Temperature: 66.0∞C
Absolute Pres.: 1000.0 mbar
Voltage: 13.589 V

My currents mod will be Awe intake, apr downpipe, magnaflow catback, and Revo stage2 maps.
the car has throw these codes and the worst thing is when EPC light up... The car loss power and cannot accelerate at all, it is so dangerous to drive on middle of the road with this condition. But after i restart the car and it works like normal. it happens only when low range of RPM like 1000RPM to 2000RPM. Not all the time, but 1 week at least 5 times.
 
Last edited:

TDI110

O_o
iirc, rosstech has a nice list of error codes.

I would take it to your tuner/dealer to have them take a look at it.
 

JiunYaw

New member
haha! took... but they cant figure out :( quite a sad case.
So, i decided to try my luck with sharing the fault codes with rest of world. see who will have to clue to help me out... i believe this forum has more professional than my country.

Brief introduction - Origin Malaysia, Kuala Lumpur.
Car model - mk6 gti.
 

Awesum

New member
I had this same code on my GTI. Had it for months now and the dealer can't find the solution.
Today I got it on my Scirocco. It's frustrating and dangerous.

Both cars have Revo stage 2, dp and itg intake

I hope somebody in the world has a solution.
I'm in South Africa
 

steemax

Go Kart Champion
I had the same issue back when i was on Revo's Stage 2 but I only had the codes for Fuel rail pressure to high and Torque monitor limit exceeded. Swapping out the intake to the stock fixed the issue but still I feel there is an underlying issue here software related.
 
Top