MeanGreenGTI that would be great if you could do a short clip, it may be the one bug I have. I've been reviewing a ton of information on xda-developers for these units, see below.
Ok ladies and gentlemen, had a moment to play around with my unit, finally got it rooted, and running Nova launcher for that more stock android feel, still trying to figure some things out but as this thread has the most feedback on the product, I'll keep updates in here as well as when I do my complete review.
I do not take responsibility for you breaking your system, and if you do Eonon will not send you a new one, do this at your own risk. This should work on 99.9% of your android units out there running "pure android".
Doing this my system seems to run better a little more smoothly.
To Temporary Root: Settings > Factory Settings > Pasword prompt > *#hct#root#
To Permanent Root: Now install superuser go through prompts, when asked rooting method choose normal, congratulations your rooted.
This allows you to do things like install custom recoveries (research how to do this) that allow you to back up your system should you brick it. This is highly recommended as support for these units are very limited.
Change your Launcher: Don't like their launcher? Install Nova or one of the several other launchers on the google play store, my unit now looks like a true android unit.
Change your DPI: the screen comes stock with 220 or 240 I cannot remember. Either way I set my down to 180 (smaller number higher looking resolution) this makes the buttons and toolbars smaller, effectively making it look like a higher resolution. There are apps on the app store for this. I have not been able to get this to stick after key pull though but haven't messed with the build prop information manually (that's for advanced users).
This unit once I changed those 3 things root, launcher, and DPI has been perfect and gives me the experience I was looking for. It will probably be this weekend before I can post a video.
PS MeanGreenGTI if you want me to remove this post send me a PM.
When you did a permanent root did you just do the temporary root, then go to the play store and install this "app""
https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en ? And then just follow the prompts from there?
Or did you do it the way as listed in the xda thread? As shown below:
0- Do a back up (copy the files somewhere safe) of your internal SD card memory. It will be wiped during the process.
1- Download the ROM (Resolution 1024x600 or 800x480) and MCU (KGL, KLD, JY, GS,RM, MX, BN, HA) for your unit.
ROMs--> repository This will get you a file named update.img. There are different "flavors" of ROMs.
Code:
- @coudu (rooted, stock). Early v4.0 and v4.1 have some problems.
- @Malaysk (rooted, with very useful mods, some come with NEXT launcher)
- @dsa8310 (rooted, almost stock)
MCUs--> Latest MCUs by Malaysk are here . This will get you a file named mcu.img
2- copy the update.img you have chosen to the root of your GPS card.
3- copy the mcu.img for your specific unit to the root of your GPS card (if you do not want to update mcu.img, you can skip this step)
4- insert back the GPS card to the unit. If no window pops up, reboot the unit. At boot, the presence of update.img will be detected and a pop up window will ask you whether you want to update your unit. It will automatically reboot into recovery mode and update your unit. Once done, remove update.img and mcu.img from the root of the gps card or you will be asked every boot for an update.
5- In some Coudu´s (sd partition of 3Gb) and Malaysk´s ROMs versions, it is necessary to do a factory reset just after the first boot so that everything works properly.
6- If you lost buttons or radio after the upgrade --> Go to Factory settings (password 126) and choose the proper canbus for your car and the radio chipset. You can change boot logo if you want.
* If you get Google services error after upgrading to KitKat see this and this