All the info is greatly appreciated.
I am attempting to trouble shoot the following DTCs, p0341, p052, p0011, p000. At first the shut off engine low oil pressure light would come on during right hand turns at about 3500 RPM. Changed oil and replaced oil filter. Fixed that issue. Next CEL came on and diagnosed with the above DTCs. Replaced crankshaft position sensor. Light turned off and codes went away. A few days later and about 200 miles later, light back on and codes reappeared. My next course of action was to pull the vvt solenoid and check the screens in that part for clogging and/or if it needed to be replaced. Currently car will not turn over, when light and codes first appeared, it would idle rough and lope.
Sent from my SM-G960U using Tapatalk