Terminal access using RX and TX pins (UART) like shown in this link isn't possible on 187B? https://w3bsit3-dns.com/forum/index.php?showtopic=799958&st=460
As is mentioned few posts above I found USB Ethernet drivers in firmware file. There are DHCP server configuration files too. I tried connect USB Ethernet with USB hub to USB port on HU yesterday. I got message: USB hubs not working. Maybe Ethernet working but I didn't have time and didn't try connect Ethernet to computer for further analysis.
As is mentioned few posts above I found USB Ethernet drivers in firmware file. There are DHCP server configuration files too. I tried connect USB Ethernet with USB hub to USB port on HU yesterday. I got message: USB hubs not working. Maybe Ethernet working but I didn't have time and didn't try connect Ethernet to computer for further analysis.
Last edited: