I wanted to know what this stuff would look like together but couldn’t find it out there. Had to build it. 2500 miles. Love the ride. The only time I ever even notice the suspension is different is when pushing the car or large dips in the road.
I'm not sure how to answer what you're asking but I'll just explain the only thing I dislike about them.
So when I said before that I notice large dips.
One thing I noticed when I was putting these springs on was that when I took the old ones off I had to use spring compressors and they were in there pressing very hard to fully extend the strut. The new ones I hardly had to compress them at all so they are not pressing back out hard until they are compressed more.
My theory is that with it like this, when you come up to a dip in the road, that front corner of your car plummets. That is what it feels like at least. Much of my quick driving is done in the hills and mountains of east TN so on the windy back mountain roads those uneven dips in the road are somewhat common.
Not terrible to adjust for if you know its coming but it is without a doubt a negative mark I have to give this setup.
Interstate driving is flawless. Potholes are no extra concern. Only very large speedbumps might scrape. Ive not scraped anywhere yet.
Are VWR springs a good match for the b4's as far as spring rates and dampening/rebound go?
i just put VWR springs/shocks/struts on this last year... i did a ST rear sway upgrade at the same time, so it is hard to tell how much springs/shocks had, but the sway bars are what control roll (not springs), and i definitely recommend upgrading the rear. I happened to find the ST sway on amazon for 70 bucks new. now if you are comparing really soft springs, with hard ones, you will feel a "roll" difference, but the spring is just reactionary, and doesnt prevent the inside wheels from lifting.I know it's an old thread but I was wondering if there is a noticeable reduction in initial body roll with the VWR springs vs stock? I need to refresh my suspension and am thinking about doing this same setup. However, if the springs behave like stock but just a bit lower, I might just save myself the money for the springs since I already have a bigger rear sway bar which makes it corner pretty flat when you're pushing the car.
I have a Neuspeed rear sway bar I installed about a month ago and it definitely made a huge difference that is more noticeable in tight corners but my goal is to dial out some of that initial body roll. Looks like id have to go pretty stiff to achieve that but I don’t want to sacrifice daily drivability so I’m probably just going to have to accept that bit of roll. I might still go with the VWRs when so refresh my suspension and see if I can tell a difference on top of the rsb. Thanks!i just put VWR springs/shocks/struts on this last year... i did a ST rear sway upgrade at the same time, so it is hard to tell how much springs/shocks had, but the sway bars are what control roll (not springs), and i definitely recommend upgrading the rear. I happened to find the ST sway on amazon for 70 bucks new. now if you are comparing really soft springs, with hard ones, you will feel a "roll" difference, but the spring is just reactionary, and doesnt prevent the inside wheels from lifting.
Do a front sway bar and get unibracing if you want less roll. After that if you still have too much roll you can always get coilovers and lower it for better center of gravity.I have a Neuspeed rear sway bar I installed about a month ago and it definitely made a huge difference that is more noticeable in tight corners but my goal is to dial out some of that initial body roll. Looks like id have to go pretty stiff to achieve that but I don’t want to sacrifice daily drivability so I’m probably just going to have to accept that bit of roll. I might still go with the VWRs when so refresh my suspension and see if I can tell a difference on top of the rsb. Thanks!