jon@HSTuning
Ready to race!
AWE DV Relocation Kit on HStuning.com
In its stock location the 2.0T diverter valve is located low in the engine bay within the turbo housing. AWE's 2.0T DVR kit is designed to bring the diverter valve higher up in the engine bay, granting easier access for servicing and replacement.
Using their relocation kit has the side benefit of cooling the intake air temps. The factory diverter valve location directs hot, compressed air back into the inlet side of the turbo, resulting in higher intake air temperatures. Once relocated with this kit, the diverter valve vents cool air from after the intercooler back into the intake which results in lower intake air temps.
Further, this kit is the only one of its kind that allows the factory diverter valve to be relocated while keeping the wiring unmodified.
AWE also offers a version of the kit that deletes their machined housing and adds their DV Simulator plug-in so other mechanical diverter valves can be installed.
AWE's included Diverter Valve adapter housing also allows any OEM or properly designed aftermarket DV to be used, which is a further cost savings for you. AWE recommend use of their 2.0T Diverter Valve for ensured long term reliability.
Compatible with FSI and TSI engines equipped with the OE K03 and IHI turbochargers and a tubular intake. Is not compatible with the OE FSI intake.
Please note: This kit requires the use of your OE noise pipe parts and is not compatible with right hand drive vehicles. Some additional parts are required for installation on vehicles not equipped with a factory noise pipe. Please contact us for the complete list of items needed to install our DV Relocation kit on your vehicle.
AWE DV Relocation Kit on HStuning.com
sales@hstuning.com
216.577.7171
LIKE us
In its stock location the 2.0T diverter valve is located low in the engine bay within the turbo housing. AWE's 2.0T DVR kit is designed to bring the diverter valve higher up in the engine bay, granting easier access for servicing and replacement.
Using their relocation kit has the side benefit of cooling the intake air temps. The factory diverter valve location directs hot, compressed air back into the inlet side of the turbo, resulting in higher intake air temperatures. Once relocated with this kit, the diverter valve vents cool air from after the intercooler back into the intake which results in lower intake air temps.
Further, this kit is the only one of its kind that allows the factory diverter valve to be relocated while keeping the wiring unmodified.
AWE also offers a version of the kit that deletes their machined housing and adds their DV Simulator plug-in so other mechanical diverter valves can be installed.
AWE's included Diverter Valve adapter housing also allows any OEM or properly designed aftermarket DV to be used, which is a further cost savings for you. AWE recommend use of their 2.0T Diverter Valve for ensured long term reliability.
Compatible with FSI and TSI engines equipped with the OE K03 and IHI turbochargers and a tubular intake. Is not compatible with the OE FSI intake.
Please note: This kit requires the use of your OE noise pipe parts and is not compatible with right hand drive vehicles. Some additional parts are required for installation on vehicles not equipped with a factory noise pipe. Please contact us for the complete list of items needed to install our DV Relocation kit on your vehicle.
AWE DV Relocation Kit on HStuning.com
sales@hstuning.com
216.577.7171
LIKE us
Last edited: