*** CTS Turbo Direct Fit FMIC Kits ***

The CTS 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC). That means you can install this kit without any trimming or modification of the bumper. The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by way of ECU upgrades/chipping the OEM FMIC struggles to keep the charged air temperatures in check. Higher charged air temperatures can result in boost cut and timing pull, both reducing the amount of power your vehicle produces.

The CTS direct fit FMIC uses a high efficiency bar and plate intercooler core, which aids in reducing pressure drop. Reducing pressure drop means that your turbo will not have to work as hard to make a given level of boost. If your turbo makes 30psi of boost pressure in the turbocharger, and your intercooler has a 10psi pressure drop then the boost measured by your ECU would be (30psi - 10psi) = 20psi. With an efficient FMIC like the CTS direct fit FMIC your turbo does not have to work as hard to reach desired boost levels. This is beneficial in two ways, the turbo life expectancy is increased due to more efficient operation, and boost leaving the turbocharger is cooler and more dense resulting in more power to the ground.

Product Details:

- Efficient bar and plate construction
- Low pressure drop
- Maintains factory mounting points
- No trimming of bumper or crash supports
- Rated for power levels in excess of 600HP
- Core dimensions: 23.00 Length x 2.00" Tall x 16.5" Height
- Cast aluminium high efficiency end tanks

Click to order our 2.0T Direct Fit FMIC Kit $799.99 Shipped


MK5 GTI TSI:



MK5 GTI FSI with CTS Turbo Big Turbo Kit:



Golf R with CTS Big Turbo Kit














PS: Use promo code "Laborfmic" for $100 off and free shipping until the end of the first week of September.

More Golf R Goodies:


CTS Golf R 3" SS Downpipe:


CTS Golf R 3" Exhaust:


CTS Fabrication Skills:

Here are a few pics of the CTS Turbo TSI Intake kit installed on Adams 2012 GTI:

We have some shiny new CTS MK6 2.0 TSI (Borg Warner) Turbo Upgrade kits in stock & ready to ship.

Have a look at these beauties in the photos below.







addle:

3″ Stainless steel, Mandrel bent piping, Tig welded construction, 4″ Stainless steel tips, //CTS Embossed mufflers, Laser etched tips, CNC mounting brackets, are just a few of the things that you’ll notice when you look at the CTS Turbo 3″ MK6 GTI exhaust. The performance gains, quality craftsmanship and amazing sound are just bonuses…

Now until January 3rd CTS Turbo will be holding a Holiday Sales event available exclusively for online sales. If you’re looking to upgrade your new GTI with a K04 kit, pickup an intake for your Golf R, a FMIC kit for your B8 A4 then you should really checkout our online store… www.ctsturbo.com This special will only last until January 3rd so take an opportunity to save money and get your upgrades now!!!!!!!