chrisisnapping
Go Kart Champion
There is plenty of room to mount the nozzle after install
It is recommended for the pump to be below the tank(thats how mine is) but modshack proved it works just as well above.
Yep, I have the same mounting locations, primed no problem.
The install is easy. Took me a while to get the mounting brackets all fabbed up, but I was dumb and flew blind instead of measuring it out. Wiring is easy. Use the add-a-fuse that Steve posted a few pages back, run your red line from that to the top rung of boost controller. Run a wire from the middle rung of boost controlled to the pump and splice in the solenoid wire. Then ground pump and solenoid. Tubing is easy, I would test with distilled water to make sure there are no leaks, then mount your nozzle and add some meth.
For tapping the tank, I drilled a hole on the side, about a quarter or half inch from the bottom, then used a 1/8 npt tap I got from amazon for like 6 bucks.
Last edited: