steemax
Go Kart Champion
Thought I'd update my thread.... Meth build is complete although I found out I'll need a solenoid since the check valve is not enough to hold the nozzle shut while under vacuum so my car siphoned up all 3 quarts in just 2 days of driving and not spraying at all. Solenoid is arriving today so I'll just throw that in and all will be good to go. I'll also be getting on a dyno Saturday. Going to do a single pull with 91 oct map and W/M off then 2 pulls with 93 map and W/M turned on... Will be using 91 fuel since that's all us peasants in Cali get.
Also have a new shopping list: SuperPro ALK, and full BSH mounts, my auto tech insert is no longer cutting it after switching to Revos software + W/M.
Here are some pics for your pleasure, mind you that TB spacer was a royal pain to install. I've done air ride suspension installs, Turbo back installs and nothing compares to this. Had to leave the car half out of commission for a couple days and take my time with it.
Sent from my BendGate Plus.
Also have a new shopping list: SuperPro ALK, and full BSH mounts, my auto tech insert is no longer cutting it after switching to Revos software + W/M.
Here are some pics for your pleasure, mind you that TB spacer was a royal pain to install. I've done air ride suspension installs, Turbo back installs and nothing compares to this. Had to leave the car half out of commission for a couple days and take my time with it.
Sent from my BendGate Plus.