GolfGurl72
New member
Can someone explain this to me… I have a 2010 Volkswagen golf base model, automatic 2.5 L I replaced Bank 1 Sensor 2 and 3. Live data shows that the sensors are working. But the engine is still showing a codes Bank 1 Sensor 2 Internal resistance too high heater not working. Live data shows It is working temperatures are above 650° at idle same with Sensor 3 both sensors were replaced with Bosch sensors twice within a week. why would it keep illuminating the CEL? It’s over due for smog…Scan attached
OBDeleven vehicle history log
Date: 2022-11-18 21:47:58
VIN: WVWDB7AJ9AW095569
Car:
Year: 2010
Body type: D5 Hatchback
Engine: CBUA kW ( hp) l
Mileage: 108572 mi
---------------------------------------------------------------
01 Engine
System description: 2,5l R5/4V G
Software number: 07K906055AG
Software version: 9209
Hardware number: 07K906055M
Faults:
P111400 - Bank 1, sensor 2
Internal resistance too high
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174706 km
P049100 - Secondary Air Injection System (Bank 1)
insufficient flow
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174705 km
P014600 - O2 Sensor Circ.,Bank1-Sensor3
No Activity Detected
static
priority - 0
frequencyCounter - 4
drivingCycle - 255
km-Mileage - 174733 km
P014700 - O2 Sensor Heater Circ.,Bank1-Sensor3
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174707 km
P125000 - Fuel level
too low
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174733 km
P014000 - O2 Sensor Circ.,Bank1-Sensor2
No Activity Detected
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174706 km
OBDeleven vehicle history log
Date: 2022-11-18 21:47:58
VIN: WVWDB7AJ9AW095569
Car:
Year: 2010
Body type: D5 Hatchback
Engine: CBUA kW ( hp) l
Mileage: 108572 mi
---------------------------------------------------------------
01 Engine
System description: 2,5l R5/4V G
Software number: 07K906055AG
Software version: 9209
Hardware number: 07K906055M
Faults:
P111400 - Bank 1, sensor 2
Internal resistance too high
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174706 km
P049100 - Secondary Air Injection System (Bank 1)
insufficient flow
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174705 km
P014600 - O2 Sensor Circ.,Bank1-Sensor3
No Activity Detected
static
priority - 0
frequencyCounter - 4
drivingCycle - 255
km-Mileage - 174733 km
P014700 - O2 Sensor Heater Circ.,Bank1-Sensor3
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174707 km
P125000 - Fuel level
too low
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174733 km
P014000 - O2 Sensor Circ.,Bank1-Sensor2
No Activity Detected
static
priority - 0
frequencyCounter - 1
drivingCycle - 255
km-Mileage - 174706 km