VCDS VIRTUAL DYNO

[visceralsoup]

Read up a bit on this and decided to try it myself.

http://www.ross-tech.com/vag-com/cars/

http://www.golfmk6.com/forums/showthread.php?t=28188

Excel generated dyno

Dynapack FWD only

Not bad right???

Note that the dynapack run (corrected) was in an 80° shop with no fan.
VCDS log was done on a highway in 60° weather.

 

[Nezoid]

Cool? Don't know if it's my laptop "1080p" screen but i can't make much out.. other than you are possibly making more than 350(whp/bhp?) at "k" rpm....

And you hit 350-ish Torque(?) at "r" rmp?

Well I guess it looks similar? Like any other graph that goes up and down.

Just out of curiosity.. where they both done in the same gear?

Any chance you have better images of either/both?

What mods anywho?

 

[visceralsoup]

Cool? Don't know if it's my laptop "1080p" screen but i can't make much out.. other than you are possibly making more than 350(whp/bhp?) at "k" rpm....

And you hit 350-ish Torque(?) at "r" rmp?

Well I guess it looks similar? Like any other graph that goes up and down.

Just out of curiosity.. where they both done in the same gear?

Any chance you have better images of either/both?

What mods anywho?

I dont have better images of the real dyno run. I can try to get a better image of the excel sheet. Torque peaked at about 370 at 4k rpm on vcds. Peaked 368 at 4k rpm on the dynapack. Hp numbers were a bit different especially at the top end. I didnt really expect much out of this but its actually very similar. Dynapack run was in 4th gear and I logged VCDS in 3rd gear like always. I could try a 4th gear pull if I had enough room haha

 

[visceralsoup]

Mods are intake, downpipe, hpfp, UM stage 2