Hey everyone, a little problem I've been trying to diagnose but getting nowhere.
Currently running DG springs, H&R 26/22mm sway, Neuspeed dog bone mount. Used all new hardware during install and had this setup since 8k miles with no problem until now. I am now at 40k miles.
Symptoms: A single and light clunk / knock from the front of the car. Only happens when the driver side is disturbed either through small bumps or mild undulations in the road at moderate speed (20~30ish). Does not sound like subframe clunk, pushing hard into corners cannot replicate the noise.
Attempt: Replaced strut mount and strut bearing. Re-checked all bolts and all seems torqued to spec. Disconnected my end links today and the noise is still there. All other bushing seems ok visually.
Suggestions? Ideas?
Currently running DG springs, H&R 26/22mm sway, Neuspeed dog bone mount. Used all new hardware during install and had this setup since 8k miles with no problem until now. I am now at 40k miles.
Symptoms: A single and light clunk / knock from the front of the car. Only happens when the driver side is disturbed either through small bumps or mild undulations in the road at moderate speed (20~30ish). Does not sound like subframe clunk, pushing hard into corners cannot replicate the noise.
Attempt: Replaced strut mount and strut bearing. Re-checked all bolts and all seems torqued to spec. Disconnected my end links today and the noise is still there. All other bushing seems ok visually.
Suggestions? Ideas?
Last edited: