visceralsoup
Ready to race!
Hey guys, interesting results from the dyno last night.
Im using UM stage 2 fully loaded
On 91 octane I can safely run at a setting of 88 octane through VCDS.
I pumped about an "e25" mix in and was able to run at 98 octane.
Ran my car back to back with these octane settings on a dynapack.
Just so you get an idea on this dyno a stock 335i made 230whp.
313whp and 368tq. Not bad!
That means a solid 30whp and 30tq across the board just by adding a couple gallons of e85
Im using UM stage 2 fully loaded
On 91 octane I can safely run at a setting of 88 octane through VCDS.
I pumped about an "e25" mix in and was able to run at 98 octane.
Ran my car back to back with these octane settings on a dynapack.
Just so you get an idea on this dyno a stock 335i made 230whp.
313whp and 368tq. Not bad!
That means a solid 30whp and 30tq across the board just by adding a couple gallons of e85