TakmaN
Ready to race!
I recently got an alignment and my car is pulling noticeably to the right. The alignment tech mentioned its due to my front camber being off (-0.5 left and -1.7 right). I've done some research and tried to shift my front subframe today but it wouldn't budge. I loosened 11 bolts on the subframe, surprisingly the passenger side did not have the second steering rack bolt which seems to be normal?
Anyone have any advice on how I can shift my subframe a little to even out the camber? I was only able to move the subframe vertically but couldn't budget it in any other direction. Or should I suck it up and just get Tyrol bolts/bushings? I'm afraid that my camber might still not be even with the bolts then I'm totally out of luck. Any help would be appreciated!
Anyone have any advice on how I can shift my subframe a little to even out the camber? I was only able to move the subframe vertically but couldn't budget it in any other direction. Or should I suck it up and just get Tyrol bolts/bushings? I'm afraid that my camber might still not be even with the bolts then I'm totally out of luck. Any help would be appreciated!