GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

MASTER CLUTCH APPLICATION GUIDE - WHAT DO WE REALLY NEED?

T

TXBDan

Go Kart Champion
Here's my info:

Stock clutch, no slipping.
Stage 1 for 37,000
Stage 2 for 6,000
3 HPDEs, 10 autoxes, daily driven in Boston traffic
 
O

OldDirty

Ready to race!
My info:
- went APR Stage 1 + intake @ 1k miles
- Clutch started slipping at WOT 5th and 6th gear about 6k miles
- Got Southbend drop in disk @ 6k miles
- Went APR Stage II + full TBE @ 9k miles after clutch broke in and was holding fine
- Disk is holding strong at 17k miles
 
APRMK6GTi

APRMK6GTi

Go Kart Champion
My info:

APR Stage 1 + Intake @500 Miles
Clutch started slipping WOT 5th/6th @ 9200 Miles
CM FX350 Installed @ 10110 Miles
 
Sherlock997

Sherlock997

Ready to race!
Stage one APR, Stg 3 SB Drop in for about 5000+ and no problems what so ever and its been through 2 auto-x and a day of 1/4 drags at the track
 
ryanrich1

ryanrich1

Ready to race!
jmnj said:
No. Carbon steel gray and no bags. Where I live in Bridgewater it's like a dirt road with some big holes. Bags are not an option.

It only happens every so often so I think it got a little glazed. Clutch does not slip under load in any gear.

Since you're local...you wouldn't happen to know of anyone that needs wheels and summer tires? Please PM me if you do, thanks.
Click to expand...

Mine also shudders slightly if you only give it a little gas, but not at all if you pull off at say 2k rpm. No slippage at ALL when giving it gas in gear. I think it's just how this clutch is, a springless hub and such a grippy material on both sides.
 
You must log in or register to reply here.
Top