winston@podi.ca
Ready to race!
When you say tap a constant power fuse, do you mean get another add a circuit? or how would that work?
And I think Il just use one posi-tap connector to get both the black wires into the ground.
Well the way we installed it is different than the way you have and without the pictures it is hard for me to describe.
If you do not have a way to tap for constant power and want to get the gauge setup working right away you can connect the yellow and red wires together to the same switched +12V source.
With this wiring setup the gauge will turn off immediately when the car is turned off and the needle will just point at its last position vs. shutting down where the needle sweeps down to -30 and park there.