FF_animal
Ready to race!
Dipshit alert [emoji599] it was a 18 mm as our buddy carlosfandango confirmed. Bolts came loose with the first crack of the harbor freight breaker bar. Thought the bar broke at first due to the loud pop of the bolts.
Once I put the new mount in I was tripping out because it wouldn't line up then realized how sagged the engine was so gave her a few pumps and all went well. Some bolts were harder to thread in by hand but once they were seated and torqued I hit the expressway for a quick spin.
Upshifts, throttle input and downshifts are great now. This engine has always had poor sound imo but this added some appeal engine note wise. Wot over the shit road near my house the wheel hop is reduced alot. Also have a superpro ALK on too so that may be helping with that. Next is the trans mount tomorrow and then I can tackle the fucked heater core in my girlsfriends car [emoji482]
Sent from my SM-G950U using Tapatalk
Once I put the new mount in I was tripping out because it wouldn't line up then realized how sagged the engine was so gave her a few pumps and all went well. Some bolts were harder to thread in by hand but once they were seated and torqued I hit the expressway for a quick spin.
Upshifts, throttle input and downshifts are great now. This engine has always had poor sound imo but this added some appeal engine note wise. Wot over the shit road near my house the wheel hop is reduced alot. Also have a superpro ALK on too so that may be helping with that. Next is the trans mount tomorrow and then I can tackle the fucked heater core in my girlsfriends car [emoji482]
Sent from my SM-G950U using Tapatalk